fordcapri1980 Posted October 17, 2011 Author Share Posted October 17, 2011 yeh either a bike pump or regulate the standard pump to about 3psi i think Quote Link to comment Share on other sites More sharing options...
BlownCorona Posted October 17, 2011 Share Posted October 17, 2011 will probably upgrade to a nice bike pump, and yeah i read that article, was just getting conflicting stories Quote Link to comment Share on other sites More sharing options...
7ESKY9 Posted October 17, 2011 Share Posted October 17, 2011 would be kool if ya gave me manifold specs i will get some specs and pics hopefuly next week when its done. Quote Link to comment Share on other sites More sharing options...
BlownCorona Posted October 20, 2011 Share Posted October 20, 2011 i possibly have the opportunity to buy some 32mm bike carbs for cheap, will these be too small for a 2000cc engine? im thinking yes. also does anyone know what size r1 carbs are? Quote Link to comment Share on other sites More sharing options...
peteretep Posted October 20, 2011 Share Posted October 20, 2011 R1 is around 40mm Quote Link to comment Share on other sites More sharing options...
tim13 Posted October 20, 2011 Share Posted October 20, 2011 i possibly have the opportunity to buy some 32mm bike carbs for cheap, will these be too small for a 2000cc engine? im thinking yes.also does anyone know what size r1 carbs are? 4x32 is prob much more total diameter than you have currently so will come down to jetting and setup , also remember bikes rev higher and you will have more vacuum being 2l vs 600cc , and with 40mm webbers/dellortos you run chokes of between 32 and 38mm anyway , hope that makes sense (still learning about bike carbs since buying a car with em fitted) Quote Link to comment Share on other sites More sharing options...
J-W-G Posted October 20, 2011 Share Posted October 20, 2011 i possibly have the opportunity to buy some 32mm bike carbs for cheap, will these be too small for a 2000cc engine? im thinking yes.also does anyone know what size r1 carbs are? 32MM IS WAY TOO SMALL IMO. You want 38mm and over for a 2000cc Quote Link to comment Share on other sites More sharing options...
BlownCorona Posted October 21, 2011 Share Posted October 21, 2011 everything ive read says r1 carbs, so i figure do it right and do it once, Quote Link to comment Share on other sites More sharing options...
drtdvl Posted October 21, 2011 Share Posted October 21, 2011 No to R6 throttles with efi? Quote Link to comment Share on other sites More sharing options...
peteretep Posted October 21, 2011 Share Posted October 21, 2011 From what I've seen, motorbike efi is over complicated compared to some 4age ( or equivalent) throttle bodies. In saying that though, I don't know alot about efi in general Quote Link to comment Share on other sites More sharing options...
CaMpylobacter Posted October 21, 2011 Share Posted October 21, 2011 yeah r6 throttles is only worthwhile in countries that don't have many 20v teyardas around. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.