HighLUX Posted February 8, 2011 Share Posted February 8, 2011 The factory seats in my van are uncomfortable and lack side support so iv been looking for seats to replace them, been to pickapart and had a look at my options, problem is most cars have the rails and base attached to the upright part of the seat, where as the vans seats are a complete unit with just rails that bolt to the base. Hard to explain so got some pics. The bolt holes on the van seats are 635mm apart. Anybody know of a car with nice seats with a similar mounting setup Quote Link to comment Share on other sites More sharing options...
BlownCorona Posted February 8, 2011 Share Posted February 8, 2011 from memory the wrx is similar, put some in my 323 a while ago, but cant remember the dimensions, Quote Link to comment Share on other sites More sharing options...
Ke36 Posted February 8, 2011 Share Posted February 8, 2011 not sure what you mean by upright part of the seat, all cars i have changed seats in have had the same mounting points as the one in the pic, reacros etc Quote Link to comment Share on other sites More sharing options...
HighLUX Posted February 9, 2011 Author Share Posted February 9, 2011 I mean the backrest. Im trying to find factory seats to retrofit but most cars have the rails base and backrest all tied into eachother Quote Link to comment Share on other sites More sharing options...
My name is Russell Posted February 9, 2011 Share Posted February 9, 2011 Have seen a few with those 95-99 ish WRX seats. Quote Link to comment Share on other sites More sharing options...
JoKer Posted February 9, 2011 Share Posted February 9, 2011 want me to measure mine? (wrx seats) Quote Link to comment Share on other sites More sharing options...
HighLUX Posted February 9, 2011 Author Share Posted February 9, 2011 want me to measure mine? (wrx seats) Yea would be great cheers, could you measure the base at the widest point too? Quote Link to comment Share on other sites More sharing options...
BlownCorona Posted February 9, 2011 Share Posted February 9, 2011 the wrx seats a very comfy too, would be a good choice. Quote Link to comment Share on other sites More sharing options...
Ke36 Posted February 9, 2011 Share Posted February 9, 2011 on a random side note, wrx seats are a cunt to back with if you like the throw ur arm round the passenger seat when backing steez Quote Link to comment Share on other sites More sharing options...
BlownCorona Posted February 11, 2011 Share Posted February 11, 2011 ^ this is true, felt like i nearly dislocated my arm first time i tried to swing it around the back of the passenger seat Quote Link to comment Share on other sites More sharing options...
JoKer Posted February 11, 2011 Share Posted February 11, 2011 /me has no issue you short cnuts? Quote Link to comment Share on other sites More sharing options...
BlownCorona Posted February 11, 2011 Share Posted February 11, 2011 nope, but the 323 isnt very big... damn nice seat, and well worth the conversion however. i even got a very similar fabric pattern on mine so it matches the rear seats and doors, if your in chch i may be selling the seats individually, to try help sell the mazda Quote Link to comment Share on other sites More sharing options...
BlownCorona Posted February 11, 2011 Share Posted February 11, 2011 also on topic, rx7 seats look nice too. Quote Link to comment Share on other sites More sharing options...
jakesae101 Posted February 11, 2011 Share Posted February 11, 2011 /me has no issueyou short cnuts? yea never had any issues with wrx seats i can still do it even in full buckets (given i go have to release the 4 pt harness to do it ) Quote Link to comment Share on other sites More sharing options...
JoKer Posted March 20, 2011 Share Posted March 20, 2011 pic dump not a wrx seat BUT it bolts in same place and rails are EDZACLY and same overal dimensions Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.