crazytim

Don't go for the cheapest is a good recomendation... I've used Eden Electroplaters by the bike shop on khyber pass. Expesive but they do it right... had a few mates search out the cheapest and it end's up peeling and shit... Theres also a place in Otahuhu thtas pretty switched on, was talkin to the guy at a car show a while back... was very erm... passionate about chroming old car parts... had to do the old...'hey, thats my mate over there better go...' thing

I thought maybe no-one liked you for owning an Alfa... I have similar problems because of dirty gemini's lol

Sandblasting try Good Blastards... they gave me a mean deal to blast a horse trailer frame that and I will quoute the dude from Taumaranui BP ... looks like it has been salvaged off the muoroa attoll... (cheeky cunt!) Quoted like $400 blasted and primed... and they come to you!

You poor cunt... are you fishing for some or something lol

I forgot.

Satin black spraybomb job... and watch out for trucks driving down country at night... was my fave car as a kid...

awesomest comment ever

that thing is the tits!

Or you parked a bit too close to a nice set of Michelins...

Maybe it's just happy to see you...

Was that hands trembling with the excitement or vibrations from all the horse power galloping thru the air?

cool... getting new mags is like christams as a kid... the anticipation of opening that great big box... Reckon this is gana be a very sick ride... Mini Eleanor

megatyre browns bay $449incl install, wiring and gst for theiving parliament cunts. Not too shabby!

is this gator yous speak of called Mike?

Love your work... best schematic ever! (and no one mentioned the bell end pissing all over it in the top right corner...) I reckon visor looks yukk in that sample pic... but thats me. Agree with whichever cunt said that they suit ozzy cars or at least larger old cars... altho there are exceptions. If you realy must visor it use the schematic from steelies tho... dont drill that beautiful blue smurf! Love your suspension upgrading too... about to do same on one of my gems before whacking fresh engine in... still have to pull apart front end, springs are stuck in it, not coil overs like yours... My engine builder gana dip strip all my suspension parts and steam clean, rather than sand blast. Cheaperer just costs me a box or 2 of Becks! Then POR15 and find/purchase bushes. (whered u get yours from?) Mean wag tho man... good to see it being looked after (re: your comments about not going 2 low to save mashing guards etc)

hahahaha lol back seats mint. Looks prety clean but my m8s always say i bet that old lady did some dirty shit back there. ewwwwwww older the berry the sweeter the juice... (or the more rancid the juice is it... or is the juice all dried up and wrinkly like a prune... too far?)

Sweeeeeeeeeet! The rear end has me very interested... where in the smelly hell did u get GTR gears from? Wish I had some of your talent man... cunts like me have to pay cunts like you a fortune to do stuff like this! Kepp it up... so keen for a closer perve one of these days... probably one of my favorite oldschool rides, the look of a miniature 70s muscle car without the big bucks (well not in your case!)

Anyone in Ak on here do this? Mite have some business for you... PM me or reply here!

Do it, sites full of crack pots... mean whip btw... reckon green wheels look sweet...different! Go the karaka green retrim (heheh)

Still waiting on her to finish gluing up edges... not installed today... Maybe tonite tho... Spray adhesive wasn't the best, Ados F2 in a tube or can is the go, spread nice and thin. Also a good rub down of the dash before beginning with thinners or at least meths, makes vinyl easier to stick to and gets all the shite off it for max adhesion... This is 1st time we've done anything like this... recomend if you can obtain a spare to start on, who knows may be good enuff to use or worst case make your mistakes on. Hopefully this fukn lasts or will be fukn spewing... don't see why it won't tho. Also advised after finishing a heat gun used to stretch around curves... did think of this and even have a heatgun but still I didnt try it.... next time!

Dash almost ready for install, few edges etc to finish and a couple more grilles to cut holes for... Dash before removing crash pad... After removing crash pad... (if only my Mrs were this filthy!!) After a bloody good scrub... just waiting on Mrs to finish gluing dash up, could do it myself but better she participate... Why I'm waiting for dash I'm making a start on tidying up engine bay... gana cut and polish all the grey hazed paintwork up like so... Working from home today, hoping to take some time to install dash too... reckon it looks pretty mint, few imperfections but it is 1st time....

This car got fucked up by rats in my garage... all cars in barn appear to be sweet. Thye dirty cunts had nested on top of engine and chewed the shit outta the HT leads and the radiator overflow bottle, alarm siren (alarm dont work so meh) and a few other bits... The biggest worry was the cable they chewed going to the Air Filter... after pulling off insulation tape and examining further found it was just chewed thu sheathing of cable... no copper showing so sweet as. Found a spare rad overflow tank in my bits and pieces and window washer tank (chewed but not rite thru) Plan is to carefully clean all the crap artound the engine/bay and remove rocker cover, get it dipped and repainted just in a hi temp enamel slam in a new rocker gasket and detail clean engine bay, tidy up reassemble it all with new leads and she'll be ready to run... Got some plans with the tidy up of the exterior, will get Blondie to post that up when she's ready. Check out gnarly rat carnage! See the little circles, they are sections of HT lead... crazy how sharp their teeth must be, looks like it twas cut with a knife! They chewed the end of the siren cone near off... cunted! Made Radiator overflow bottle look like swiss cheese! The air filter cable... no copper showing! Sweeeet! Window washer bottle, damaged but not bitten all way thru... have 2 spares tho so will change out Result of being a hoarder... just happened to have a spare rad overflow bottle and alarm siren... (he says raising a middle finger to every cunt thats given him shit about all the crap in his shed over the years...)

Me and Blondie finally started getting this old bitch ready for the road... door cards have been out for months waiting retrim of their inserts so Blondie went down to Spotlight and got 1.5m of White Vinyl leatherette. I was a bit like ...'Could have got away with a metre...' Tite cunt that I am but ended up with enough to cover the spare dash pad that I had from my 1st Mazda Dohc turbs from near on 10yrs ago... So spent today retrimming that, just contact adhesive straight over the crappy stained grey vinyl finish. Just hope this shit lasts... Looks pretty mint in our opinions, if you have nothing nice to say feel free to go fuck yourselves... we're well proud of our 1st interior trimming attempts!

10/10 mean tank... licence plate says it all EVIL!! Not skelator evil but evil all the same.

Probably a lot of empty yards/industrial type areas around... could it be worth speaking with a real estate agent? So many places gone under, leases not renewed, for a cut of the fivers @ the gate land owners may be accomodating... or are yous after somewhere more public for the passersby participation factor? Also January is when the hay gets cut, a lot of land around... could do a mini Kumeu type of thing... Do you's divide off into Manufacturers etc? (GM-T boes, T car nats finally... I'll bring one for each that u cunts bring insert Tui slogan here... )