escortwags

20B sequential ya dog

Hi @cletus hope you're well Hopefully another quicky for you Do you see any issues with this notch at all? Keeping in mind that it will also get plug welded and fish plated. It's made out of 10 Gauge CRS, I have the car construction manual but it doesn't really go into deal on C notches. https://www.murraykustomrods.com/store.php#!/1949-1954-Chevy-Car-C-Notch/p/124962205/category=32296533 Thanks

@cletus - Thanks for that, looks like Ill go down the path of a much more "known" 4 link setup like the kit below then for the rear https://www.ridetech.com/product/weld-in-air4link-parallel/

@cletus Couple of Q's for you when you have time Do you see any issues with the modifications done on the link below "in principle" to allow the front of a 1952 Belair to be airbagged? https://www.lowrider.com/how-to-tech/chassis-suspension/0603lrm-cheap-air-bag-suspension/ Do you see any issues with using the below kit to allow the rear of a 1952 Belair to be airbagged? https://www.jimenezbroscustoms.net/product-page/1949-1954-chevy-car-2-link If my questions are to broad just let me know

You beauty, thanks Mr Cletus!!!

Very generic question but.....Mustang 2 front ends to fit early 50's chevs. (Wanting to bag the car and this seems like the easiest option) Are their any brands from U.S.A that get the instant tick of approval?

I just used some random alloy hard line from Ullrich, cut with pipe cutters and used pushed locks everywhere works a treat for a few years now Edit: see shitty old pic attached I found on my phone, wasn't that hard to do at all, just need patience and maths

not sure who you are using for a cert, but ours got done 1 1/2 years ago with 7 switch control and flew through no worries? I actually use the individual bag control overtime I drive to get the car actually level

as above, the supreme struggle is real, so much want but near impossible to do

Could well be keen, how much we talking?

I to embarking on this mission tonight, will let you know how I go if it makes any difference haha. My old hilux diff had this exact thing done so don't see any issue there

Thread hijack: speaking of Aliexpress rivnut guns, which of those has anyone brought that didn't break/worked mint?

Got certed a year ago, we had to have it hooked to the neutral safety switch and only work with key on acc, however it all runs though a relay so if you get in trouble only one wire has to pop off for full control

Repairs on our car went like this - panel beater fixes many things - repair cert man pops in at various stages to take photos - panel beater says I'm done - repair cert man pops back with his 4 pages of forms fills them out with said photos and signs it off we had over 250 photos taken of the repairs from the repair cert guy Who knows we had it pretty bad I think, surely there would be a few that are not that hard core/luck of the draw I guess Edit: we were flagged at the border for rust though, no flag = good times

unless you have photos and repair cert, if they spot old repairs THEY WILL grind back your paint. If they spot the slightest amount of surface rust THEY WILL make you get it sand blasted (coming from experience) hold on tight for a long and heart braking ride Bottom line you have to get a repair cert or you will be screwed. Just getting a repair cert will screw you though

oh gutted just saw you posted that!!!! That aircon unit would be pretty nice. Yeh myth16 is getting there deadlines always drain the bank account and force shit to get done will be at chrome fest hopefully not broken down and hooning round hamptons

heaters galour just for you if you are still looking http://www.trademe.co.nz/motors/car-parts-accessories/mazda/interior/auction-745420245.htm http://www.trademe.co.nz/motors/car-parts-accessories/mazda/interior/auction-745419449.htm

2" made a shit ton of difference to the look of our car, was well worth it. Plus handles better at a lower height

from what I know its just meant to be a reputable brand ie. CPP. We had no paper work with ours and went through fine, just got to watch scrub line as god dam it was close when running 14" wheels and 2" drops

Can vouch for Adrenaline R products. I run a full stainless exhaust with V-bands on my 12APP, is surprisingly quite and doesnt sound tiny and shit. Vids on my instagram (search "ilegit616") for an idea of noise (just dodge the ones with a big yellow pipes haha) Equal length 2" headers - into separate 2 Adrenaline R resonators (their 500mm length ones - merges after into 2.5" by back seat - under diff into Adrenaline R dumpy done

That's the plan

Lols at people asking 500 for an old arse heater unit, I unfortunately threw mine out and all associated piping when we last moved. (not help spam) Build looks like its going swell dude

these guys http://www.davie.co.nz/ Are the stockists for these http://www.niceproducts.com.au/catalogues/wheel/bolts.php

^food for thought Was just going to take it to magnum and let them give me a piece of paper. Shall see how I go. Can't wait to hoon it and feel the difference in POWA

Problem solved All is well in V8 land Will see how it likes the abuse over The weekend but the MSD unit is way superior to my china burden I now own Chur Oldschool