Ke36

my car also breathes quite heavily aswell catch can (water bottle ) is slowly filling up but car is driven very infrequently and never uses water so like im not too worried i dont get any obvious vapour out under the bonnet tho have heard numerous stories of people hooking cans up and the cars smoking heavily tho and returning the setup to stock and the problem disappearing for what its worth, tis exhaust smoke tho as opposed to underbonnet

what model car is your rad is outta bro? looks like its quite a nice fit in there good to see your getting back into it, you sort the wiring issue? winter is hard on the motivation

25mm to be by the book

yea banjo fittings

i have a starion one know so its slightly different, as the oil filter sits out where those barb fittings are, but my oil cooler lines come out where those two bolts on the lower front surface are also barb fittings on oil lines

the vr4 oil mount should have two big outlets for oilcooler lines?? maybe the non turbo ones dont? otherwise the grub screws can be used for gauges etc, im even using one for my turbo oil feed (higher pressure than the head)

i hope thats the only reason its going on

awesome stuff yea specs etc plz

yuha was bout to say this make sure the surfaces a reasonalby flat, if your cleaning it up mint it should work

looking good mate new kit looks better than the old one anyways where you pic the side mirrors up from? need a new one for my car and is the same style as youv got

pretty sure its toyspeed

i just did heaps of low 14s didnt get with in .5 of a sec of my best et got a lot of 2.0 60fts which is the best ive done but my mph has dropped i hate these fuckin smutty l200 gboxes too o and dont try and do burnouts with your handbrake on went sweet after i realised heres a shit vid of it, i realise its on at about 40sec into the vid, after i smoked my clutch to fuck http://www.youtube.com/watch?v=lBuXVx-cNus yea love the mad camera setup in the torana too

2 speed powerglide

yea an engineer should be able to make you a bellhousing to suit any gbox dont know any specifinc engineers but the quick drag racing guys etc need steel bellhousings and the 0trctn ex lancer i know had a custom bellhousing made for his 4g to w series gbox here in nz another thing to think of is shifter position no point getting something that fits etc to find out ur grabbing gears behind you (im probly telling you to suck eggs i know)

nah not this time i dont think, i really need to sort my suspension out for better launches, maybe after winter

yea me too

26th April 2009 Powerbuilt International Raceway Hasketts Road Christchurch www.pbdrc.co.nz Pegasus Bay Drag Racing Club would like to extend an invitation to racers and spectators of motorsport to join us at Powerbuilt Ruapuna Drag Strip at the South Island Champs, also to celebrate 40 years of drag racing in Christchurch! Gates Open 8.00 am Scrutineering and entry 8.00 am until 10.00 am IMPORTANT! Please insure you are there in time or you may not be able to race. Qualifying and practice 10.15 am until 12.00 pm Racing starts 12.30 Racer entry fee $40 To enter driver must carry New Zealand drivers licence and the vehicle must have current Reg and WOF. Pegasus Bay are holding a free BBQ in the pits after racing, feel free to stick around! We will aslo have T-shirts for sale commemorating 40 years drag racing in Christchurch. STOCKS VERY LIMITED Not in Christchurch but have a car you think we will want to see? Contact the PBDRC Committee via the website www.pbdrc.co.nz Spectator Pass at gate $12 per person Car pass at gate for $40 up to 5 people Children under 12 free entry CLASSES all classes are DYO, this maybe subject to change. Competition 8.90 and faster. Modified 12.90 and faster. Street Comp Bike Street Bike

No you've missed the point. When running, the alternator develops about 13.8V, and the ballast resistor drops this to run a coil designed for an 8V feed. When starting, the 200+Amp load on the battery drops the voltage that the battery can deliver to about 8V, so shorting the ballast resistor provides the correct voltage to the coil to deliver a decent spark to start then engine while cranking. If you run a non-ballasted feed to an 8V coil, then the HT voltage will be way too high, and the arc generated between the points will soon burn them out. is that not what i said?

yuh ballast resistor just drops down the 12v feed so you dont burn your points out real quick

And probably more so the fact that you would have three wide tyres and one skinny one so they tell you to keep your speed down or else things may get awesome when cornering too fast. yup guys use them as front runners on drag cars, they just change the tyres

def yellow other colour engine bays look eww

^^ wat he said

rofls at a "beach" buggy wearing et streets!

seperate start switch is all gravy i was hesitant bout doing it at first too, as i wanted everything stock etc, but trust me the bitches love the push button start they just wanna touch it

yea looks sweet but stop posting updates of this in user projects gets me all excited seeing you as last poster in there, thinking uv added to ur ex post