rusty360

https://www.trademe.co.nz/3064873364 400BHP??

Yep been there played that game the old number 3 big end fail!! Thanks for all the info!!!

You may have answered this some were before or on ya you tube channel, I haven't watched it all yet but did you document the build of the N/A engine?

Fair enough all sounds logical! And I'm picking the best place to start for a turbo build is with the 4ageze?

After all this testing are you going to produce the ultimate budget N/A 4age build guide? I'm considering putting another one in a project car coming up, yep they are getting on a bit but I like them!! In ya experience what would ya start with and what would ya do to it to get ok power without breaking the bank N/A wise? Or is it just easier to go down the turbo route? But I'm picking thats lots more dollars!

Sweet as, ill block it off. At the moment it's going from the rear head sensor block straight into the rear of the water pump, I didnt even think when doing it years back but now someone has mentioned it what a fark up haha.

Saw it at the show looked awesome mate!

Structural stainless frames etc normally mig uses a different gas mix - Stainsheild. And stainless wire. Pipe or dairy etc or anything pretty - tig with argon for the gas.

Fark wee skidded the shit outa that Blue top, never killed it I remember one Bathurst day being given shit by the v8 boys que a 4th gear on the limiter burnout till both tyres popped. Outa of interest you wouldn't know were I could find a RWD thermostat housing? The one currently in my shed has corroded into nothing. I've been reading a bit on the web about the 4age cooling systems the car I'm doing some work on has no heater so has the rear head sensor block connected straight to the heater water pump feed I'm thinking this could Create a radiator bypass? What's ya thoughts? What did ya do in ya starlet or ya truck? Awesome videos and info by the way!!!

I remember we had a ae82 skid car we put a 4age. I remember we reckoned the blue top 40mm crank revd better than the red top 42mm crank, only seat of the pants thou. Then I remember we got a 4ageze and were abit disappointed.

Does anyone know were you can buy just this plug? Want to make up a few leads.

Hey I've been send a few files to the laser cutters lately and they are struggling to see the part or open then. Is there someone he I could send a file to, then we can see if you can read it or I've farked something up. Been using DWG, DXF formats. Cheers rusty.

You building ya frames from scratch?

How stunning does that river look

Not a logging truck, anglia van. I'll have to see how much of a mission it will be to swap it back to normal use.

Im looking at buying a project rego is currently on hold, but just looked on car jam and see its on exempt class A, is this anything to worry about?

Maybe thats why he's got 4 kids?

Knee rebuild was it?

Surely there's some fuses in the relay box? Or is it sealed?

Hey mate, I'm not a pro wire guy just a back yard basher but yes would definitely add some fuses in. @Lord Gruntfuttock sounds like he's a wiring guru. They make some really nice little fuse blocks now. Reading above sounds like ya loom is already fused?

Arh sweet as, working out exactly what to buy off rs was a bit of a mission anyways, as they don't list them complete have to nut the male the female the pins, the sockets and then the pin locks!. They did seem pretty cheap thou.

Rs components?

Forgot to ask but does epoxy go over it ok?

I'm picking its in shop primer now?

Looking good man! How do ya find the brunnox works? Seems to hold out the rust ok?