thebeasts Posted July 26, 2016 Share Posted July 26, 2016 can people recommend the best and cheapest place to but this upgrade for a 1600 crossflow engine please. Quote Link to comment Share on other sites More sharing options...
steve Posted July 26, 2016 Share Posted July 26, 2016 PowerSpark Ignition in the UK are good and cheap (from memory) 1 Quote Link to comment Share on other sites More sharing options...
tortron Posted July 26, 2016 Share Posted July 26, 2016 I got an accuspark unit from their website in the UK. Looks made well enough and IV gotten a couple hundred km so far Quote Link to comment Share on other sites More sharing options...
yetchh Posted July 26, 2016 Share Posted July 26, 2016 A third is pertronix, normally have three grades available with the ignitor III having an adjustable rev limiter. Good product, never failed me. Quote Link to comment Share on other sites More sharing options...
Rookie Posted July 26, 2016 Share Posted July 26, 2016 Just convert it to efi, cheap and gets rid of most of the worn out/ British junk. It'll cost you about $800 to do everything (probably cheaper if you adapt a efi throttle body and don't do itbs), it will also be the single greatest modification you can do to your old car. Quote Link to comment Share on other sites More sharing options...
peteretep Posted July 27, 2016 Share Posted July 27, 2016 if you have access to a lathe and drill press, you can make an old subaru electronic distributor fit for about $20 Quote Link to comment Share on other sites More sharing options...
Mr. Mainstream Posted July 29, 2016 Share Posted July 29, 2016 if you have access to a lathe and drill press, you can make an old subaru electronic distributor fit for about $20 details please Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.