Mitch.W Posted February 6, 2015 Share Posted February 6, 2015 so i am trying to get my cousins gemini running, we have replaced leads,plugs, points, dizzy cap, rotor, coil etc. The problem is i have 11.9V a the coil then into the dizzy, then 0v coming out into the plug leads at all nothing when cranking either. i have checked the points multipule times 0.4mm has anyone got and suggestions? im really stuck and trying to get it running as a suprise for him for when he gets back from auzzy on monday. Quote Link to comment Share on other sites More sharing options...
flyingbrick Posted February 6, 2015 Share Posted February 6, 2015 Do you have power at the coil while cranking? Quote Link to comment Share on other sites More sharing options...
Mitch.W Posted February 6, 2015 Author Share Posted February 6, 2015 has a solid 10v while cranking Quote Link to comment Share on other sites More sharing options...
flyingbrick Posted February 6, 2015 Share Posted February 6, 2015 What happens if you touch the coil lead when its on. Report back Quote Link to comment Share on other sites More sharing options...
Mitch.W Posted February 6, 2015 Author Share Posted February 6, 2015 well i presume i will get a shock. that is not the problem though, i know i have power at the coil... I was wanting help, not useless shit Quote Link to comment Share on other sites More sharing options...
bigmatt4 Posted February 6, 2015 Share Posted February 6, 2015 put a testlight on the neg side of the coil and crank the engine and does it flash? yes---- check condensor or coil No----- make sure the points arent shorted to ground. Quote Link to comment Share on other sites More sharing options...
downtrail Posted February 6, 2015 Share Posted February 6, 2015 Dizzy not timed up? If coil gets warm sitting there then points are shorted Quote Link to comment Share on other sites More sharing options...
igor Posted February 9, 2015 Share Posted February 9, 2015 Have you replaced the condenser? Maybe along with the points as a matter of course but it was not on your list in the initial post. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.