fuzzb8 Posted September 16, 2011 Share Posted September 16, 2011 hey guys and girls im currently tryign to get my 1980 rwd mazda 626 back on the road ive bleed the brakes up but they still not working fully pads and calipers are good no leaks or anythign i have noticed when you pump them up the let the pedal go the reservoir is bubbling on release any ideas thanks Quote Link to comment Share on other sites More sharing options...
glen Posted September 16, 2011 Share Posted September 16, 2011 Im guessing if there is bubbles you have a leak somewhere or you havn't quite bleed them all the way. Quote Link to comment Share on other sites More sharing options...
tortron Posted September 16, 2011 Share Posted September 16, 2011 mastercylinder been out at all? otherwise, bleed, repeat, bleed, repeat wait a week, bleed again or or borrow/build a vacuum bleeder Quote Link to comment Share on other sites More sharing options...
escortwags Posted September 16, 2011 Share Posted September 16, 2011 Had a similar issue many moons ago with my escort, no matter what they would never bleed AT ALL (couldnt get random air out. SOLUTION.... Get one of those hand dildo bike air pumps, make a massive tampon out of toilet paper as you would to seal a cone on a bong, jam it on top of the master cylinder where you put fluid it, open up bleed nipple and pump the fuck out of it, work mint for me hahahha Quote Link to comment Share on other sites More sharing options...
tortron Posted September 16, 2011 Share Posted September 16, 2011 Had a similar issue many moons ago with my escort, no matter what they would never bleed AT ALL (couldnt get random air out.SOLUTION.... Get one of those hand dildo bike air pumps, make a massive tampon out of toilet paper as you would to seal a cone on a bong, jam it on top of the master cylinder where you put fluid it, open up bleed nipple and pump the fuck out of it, work mint for me hahahha vacuum bleeder i have one made from a tyre valve glued though a mastercylinder cap im probably meaning to say pressure bleeder btw Quote Link to comment Share on other sites More sharing options...
Valiant Posted September 16, 2011 Share Posted September 16, 2011 Your master cylinder is stuffed. Buy a new master cylinder, bench blead it, fit it to the car and blead the system through. Quote Link to comment Share on other sites More sharing options...
escortwags Posted September 16, 2011 Share Posted September 16, 2011 My solution = poor man/bong fiend solution hahaha Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.