punk_a_saurus Posted June 2, 2011 Share Posted June 2, 2011 hey guys , i cant figure out whats crapping out with my indicators in my 83 kp61. Most of the time they dont work at all and neither do the hazards, but sometimes they do work. Have checked for loose connections etc but cant seem to find anything. Has anyone had this problem before? Any help is appreciated. Cheers Quote Link to comment Share on other sites More sharing options...
Taistorm Posted June 2, 2011 Share Posted June 2, 2011 Check all the terminals, make sure the bulbs are correct, also check the relay/flasher. Borrow someones and swap it over to see if it makes a difference. Quote Link to comment Share on other sites More sharing options...
Beaver Posted June 2, 2011 Share Posted June 2, 2011 yeh often the relay can be temperamental. also pull apart the indicator stalk/swtich and clean all the connections and contacts. have had then gunk up a number of times. Quote Link to comment Share on other sites More sharing options...
Mike-e Posted June 3, 2011 Share Posted June 3, 2011 check the relay/flasher Quote Link to comment Share on other sites More sharing options...
crustywhip Posted June 3, 2011 Share Posted June 3, 2011 Found the same problem on a rx7 today. Was faulty flasher relay so start there or give it a few taps and see if it starts to work. Same symptoms as you described. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.