My name is Russell Posted August 27, 2009 Author Share Posted August 27, 2009 Wasnt in a car. The particularly loud Triumph. I was beside you the pedestrian lights past New World Oh HAHAHAHAHAAAAAAAAA was that you!!!. Did you make it that noisy or is there an exhaust leak? Quote Link to comment Share on other sites More sharing options...
Black Francis Posted August 28, 2009 Share Posted August 28, 2009 i got that honda. cold kiwi is on if i can find a wheel Choice! if ya give up on it 1st dibs fuck measure the spline size on your rear wheel/ count the splines. cant find a new honda wheel. Fafidy may fit but some honda guru in hamilton reckons there are two different types of fa50 spline and he wasnt sure if either would fit the honda. its all up to you/is there anybody in auckland with an fa50 or similar? edit: also honda guru bike wrecker reconed that 10 years ago it was real hard to find new wheels for these and he thinks ill never find one. tis gay cos my friend had an nc50 exactly the same under his house for like 10 years. Seized engine and rusty as fuck but the wheels were ok 6 months ago he went ta ausi and some maori got the scooter Quote Link to comment Share on other sites More sharing options...
My name is Russell Posted August 28, 2009 Author Share Posted August 28, 2009 Just weld up your own bro they used to do it in they old days ... iv got about 5 sets of FA50 rims one of them just has Re bar spokes works all good Quote Link to comment Share on other sites More sharing options...
Black Francis Posted August 28, 2009 Share Posted August 28, 2009 men im guna goto the byclicle shop right now and see if they can respoke it Quote Link to comment Share on other sites More sharing options...
10Speed Posted August 28, 2009 Share Posted August 28, 2009 pretty sure the guage is going to be heavier than bikes... would try a motorbike shop myself Quote Link to comment Share on other sites More sharing options...
My name is Russell Posted August 28, 2009 Author Share Posted August 28, 2009 Yeah or do that if you want it done properly Quote Link to comment Share on other sites More sharing options...
10Speed Posted August 28, 2009 Share Posted August 28, 2009 not to mention very few bike shops build their own wheels... take it to www.freeriden.co.nz if you want one that does... Quote Link to comment Share on other sites More sharing options...
P_Star Posted August 28, 2009 Share Posted August 28, 2009 unless I have read this wrong... which is likely... new spokes shouldn't be too hard to come by. just measure them up and get some aftermarket stainless ones. Try some of the UK/US stores or even ebay there are heaps of kits available just have to find some with the right bends, length etc Quote Link to comment Share on other sites More sharing options...
Bullitt Posted August 28, 2009 Share Posted August 28, 2009 Wasnt in a car. The particularly loud Triumph. I was beside you the pedestrian lights past New World Oh HAHAHAHAHAAAAAAAAA was that you!!!. Did you make it that noisy or is there an exhaust leak? Bought it like that. Thats the way reverse cone mufflers are supposed to sound. I have a new set of mufflers in my garage Ill fit this weekend. Quote Link to comment Share on other sites More sharing options...
Truenotch Posted August 28, 2009 Share Posted August 28, 2009 fuck measure the spline size on your rear wheel/ count the splines. cant find a new honda wheel. Fafidy may fit but some honda guru in hamilton reckons there are two different types of fa50 spline and he wasnt sure if either would fit the honda. its all up to you/is there anybody in auckland with an fa50 or similar? I've got a spare FA50 spindle at home, want me to measure it for you? There are two different ones. A large spline and a small spline, and both are completely different. I have a spare big one at home, want me to measure for you? Quote Link to comment Share on other sites More sharing options...
Black Francis Posted August 29, 2009 Share Posted August 29, 2009 that would be cool as if you could man. bike shops said they could do it but they dont have access to the correct size spokes. motorcycle shops said fuck we aint done shit like that since 1976 but heres a number for a guy who does it. i will ring this man on monday. nobody else in ak can help me by the looks of it. I rang up the entire yellow pages Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.