will i am Posted September 27, 2012 Share Posted September 27, 2012 finally finished my starion adjustables on my lancer viewtopic.php?f=17&t=30863 tried putting on my momo 16 by 7.5s and im gona need 35mm spacers if im correct you cant cert spacers that think or am i incorrect on that? what is the max width spacers you can cert? im going to need to cert heaps off mods so might as well do it all at once after doing a bit off measuring i have found the starion hubs sit 10mm closer to the strut than original ex lancer setup Quote Link to comment Share on other sites More sharing options...
Bling Posted September 27, 2012 Share Posted September 27, 2012 Google said this: http://lowvolumevehicle.co.nz/2012/02/w ... cers-faqs/ Short answer = 35mm is too big. Needing to use such a large adaptor sounds like you're trying to use totally wrong offset wheels? That just seems to be quite far out from fitting that's all. Quote Link to comment Share on other sites More sharing options...
will i am Posted September 27, 2012 Author Share Posted September 27, 2012 they use to fit the standard ex suspension with 5mm slip on spacers but yes may have to find some new wheels Quote Link to comment Share on other sites More sharing options...
ta63-1uzze Posted September 28, 2012 Share Posted September 28, 2012 27mm max for cert : ) Quote Link to comment Share on other sites More sharing options...
Shandangles Posted September 28, 2012 Share Posted September 28, 2012 and slip ons are a legal no-no also. and 16" momos, come on man... Quote Link to comment Share on other sites More sharing options...
will i am Posted September 28, 2012 Author Share Posted September 28, 2012 its only a legal if you get caught and i bought the momos 4 years ago and over paid so want to get some use out off them Quote Link to comment Share on other sites More sharing options...
JoKer Posted September 28, 2012 Share Posted September 28, 2012 or if you crash/void insurance Quote Link to comment Share on other sites More sharing options...
Raizer Posted September 29, 2012 Share Posted September 29, 2012 and slip ons are a legal no-no also. Not quite. Spacers (slip-on type) are trickier, usually have to be custom made.max 20mm Must be single stud pattern. ie not those multi fit 4/5 stud slotted hole ones surfaces must be parallel and flat. no holes other than the holes for the wheel studs and locating bolt wheel must be supported by hub spigot not wheelstuds spacer must be attached to the hub or wheel wheelstuds still have to be long enough made from suitable material etc Also Cletus said its 30mm max for bolt on spacers now not 27mm. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.