Ridal Posted April 2, 2011 Share Posted April 2, 2011 Just wondering if there are any cross compatible strut braces for an A6 chassis? Or does anyone have one for sale? James Quote Link to comment Share on other sites More sharing options...
Seedy Al Posted April 2, 2011 Share Posted April 2, 2011 a6? Quote Link to comment Share on other sites More sharing options...
Ridal Posted April 2, 2011 Author Share Posted April 2, 2011 Yea like the chassis series xA6x eg AA60 TA60 KA67. Did a bit of searching and Cusco make one that will fit xA6x and xT14x. Quote Link to comment Share on other sites More sharing options...
Seedy Al Posted April 2, 2011 Share Posted April 2, 2011 sweet as, firgured you meant that, was only wondering, on this forum A6 could be a valient or anything. Whats worth of a cucso? i have an AT-141, could be keen. though not that hard to mod one that you might get cheap as shit, depends on skill though Quote Link to comment Share on other sites More sharing options...
Ridal Posted April 2, 2011 Author Share Posted April 2, 2011 For real. Didn't cross my mind. Ok they're about $140 in Japan. If you were to mod one it would have to be pretty close to fitting wouldn't it? I mean it would be easy if you just had to re drill the holes but if it was too short you'd have to extend the tower plates or something. Plus a new cusco would be pretty nice addition to the engine bay. Quote Link to comment Share on other sites More sharing options...
Seedy Al Posted April 2, 2011 Share Posted April 2, 2011 Yeah if you found one that had close to length then you will be sweet as. its not hard to as you said, redrill, or cut new plater out of steel or alloy and wled on brakets to suit. But yeah new cusco one would be hella flash Quote Link to comment Share on other sites More sharing options...
BlownCorona Posted April 3, 2011 Share Posted April 3, 2011 ive got a Rigid Motorsports solid strutbrace from a mirage if its any use Quote Link to comment Share on other sites More sharing options...
Roman Posted April 3, 2011 Share Posted April 3, 2011 I've seen a guy using an S13 Silvia front strut brace on front of a carina. Just said that you need to buy a brand that has a good adjustment range, as you need to widen it out a bit to make it fit. Probably what I'll end up doing. But yeah, can get strut braces, camber plates etc brand new from cusco still, carina/corona specific. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.