BDA780

Keen

Damn that's sweet. Name the roasts after rubbish old cars.

Top work Alex and Tim. Looks so sweet without 1/4 windows and black grille.

The Auckland Monthly Meet! Wednesday 23 March 7:30pm onward A chance to catch up with fellow club members, talk some shit and eat some lush foodstuffs. Burgerfuel and Mexicali Fresh cnr of Robert St and Hurst St, Ellerslie See map. [/url] The DEAL$: FREE Drink with Burger and Chips Purchase (From the COKE range , excluding mini burgers) FIRST MEET??If you are new to these meets here are a few points that may help,Most people usually show up between 730 and 8 ish,We roll down to get burgers sometime around 8 / 8:15 ish. Or whenever you feel like really.We sit around either at burgerfuel or back up top and continue the yarns.Remember its always a casual affair , a place to yarn to mates and make new ones.An oldschool car is not required at all, of course if youve got one on the road then bring it and show it off!! Doesnt need to be flash or special.SOME OF THESE ARE NEW, MOST OF THESE ARE COMMON SENSE. WE WILL PROVIDE A FEW GENTLE REMINDERS WITH THE NEW RULES BUT REPEAT OFFENDERS MAY BE ASKED TO LEAVE. RULES AND THE BORING STUFF!! Basically these are in place so we have a fun and friendly meet and leave the carpark clean and tidy like we were never there. Take your rubbish away with you or put it in a bin, (Use the public bins downstairs not the private ones belonging to the business up top Smokers please don't dispose of your butts on the ground! Please limit the ALCOHOL consumption. Its a public place and the Police/security regularly stop in and we don't want want anyone getting in trouble, We also don't want people leaving empties around. You are welcome to invite a few mates, but please note you are 100% responsible for their behaviour If you belong to other clubs and feel they might be keen to come check out our meet then that's cool but please see BDA780, Threeonthetree or 73crownwagon for permission before inviting them. NO Skids or Reckless/Dangerous driving Please leave a space near the fenced off area clear for the cleaners and don't block them in if they are there. Park in a proper carpark! If its full then just use a bit of common sense and try not to park to many people in. Newschool cars please park to one side and be prepared to move if we get short on space. If its raining and we have to park downstairs then new cars park upstairs or out of the way. The covered carpark is very small and needs to be OS only, If you have any suggestions or input for the meets then PM BDA780 , Threeonthetree or 73crownwagon Thanks!!

yes

I'm pretty sure the latest classic Ford had a price to power section for the crossflow.

Congrats on the mini pic in the latest NZV8 mag

The Auckland Monthly Meet! Wednesday 17 February 7:30pm onward A chance to catch up with fellow club members, talk some shit and eat some lush foodstuffs. Burgerfuel and Mexicali Fresh cnr of Robert St and Hurst St, Ellerslie See map. [/url] The DEAL$: FREE Drink with Burger and Chips Purchase (From the COKE range , excluding mini burgers) FIRST MEET??If you are new to these meets here are a few points that may help,Most people usually show up between 730 and 8 ish,We roll down to get burgers sometime around 8 / 8:15 ish. Or whenever you feel like really.We sit around either at burgerfuel or back up top and continue the yarns.Remember its always a casual affair , a place to yarn to mates and make new ones.An oldschool car is not required at all, of course if youve got one on the road then bring it and show it off!! Doesnt need to be flash or special.SOME OF THESE ARE NEW, MOST OF THESE ARE COMMON SENSE. WE WILL PROVIDE A FEW GENTLE REMINDERS WITH THE NEW RULES BUT REPEAT OFFENDERS MAY BE ASKED TO LEAVE. RULES AND THE BORING STUFF!! Basically these are in place so we have a fun and friendly meet and leave the carpark clean and tidy like we were never there. Take your rubbish away with you or put it in a bin, (Use the public bins downstairs not the private ones belonging to the business up top Smokers please don't dispose of your butts on the ground! Please limit the ALCOHOL consumption. Its a public place and the Police/security regularly stop in and we don't want want anyone getting in trouble, We also don't want people leaving empties around. You are welcome to invite a few mates, but please note you are 100% responsible for their behaviour If you belong to other clubs and feel they might be keen to come check out our meet then that's cool but please see BDA780, Threeonthetree or 73crownwagon for permission before inviting them. NO Skids or Reckless/Dangerous driving Please leave a space near the fenced off area clear for the cleaners and don't block them in if they are there. Park in a proper carpark! If its full then just use a bit of common sense and try not to park to many people in. Newschool cars please park to one side and be prepared to move if we get short on space. If its raining and we have to park downstairs then new cars park upstairs or out of the way. The covered carpark is very small and needs to be OS only, If you have any suggestions or input for the meets then PM BDA780 , Threeonthetree or 73crownwagon Thanks!!

Yes 4 small 2 large I believe

Damn missed it. Bring to monthly meet on Wednesday

Go in through the gate nearest Kumeu township for display cars.Best route there if coming from the shore is to go left at the roundabout to taupaki and then go around the back of the showgrounds to the entry.

Cut a hole through the treeline so you can easy haul swapmeet parts all day.

Looks superb!! Excited to see this at Kumeu assuming it's gonna be there. It reminds me of this song:

rotorhoe is. Its actually a B1500

Make your own thread in this section (other projects).

Since the beginning of this project O.S. decided to discontinue production of the Wankel engine, this in turn has obviously been met with an increased demand for second hand engine and parts. As the Type II engine is the rarest on auction sites, I decided to purchase a used condition Type I (first of the PP engines) and use that as a base for the project. The first step was to dismantle the engine to see its condition. Disassembly proved quite a challenge with one main setback. Whilst removing the rotor gear the head of my 2mm hex bit broke off into the cap screw proving a pain to get out, only for me to cock it all up and loosen the rotor from the vice chipping part of the rotor where the apex seal sits. The rotor could be reused but I have since bought a replacement. Unsurprisingly the engine is simple in architecture with no side seals just apex seals held in by two mini leaf springs. The beauty lies in the finish of the parts. Without side seals the rotorhousing, rotor and end plates are all surface ground to ensure the engine has compression. As I have two generations of peripheral port O.S. Wankels I got rotorhoe to take some extra images images of the differences between generations. From what I have read and can be seen in the image above the Type II has a machined rotor housing and rotor as well as a newer glowplug, carburettor and cap screw fasteners. The remainder of the parts carry over from the Type I. Thus, I aim to improve the Type I where possible and encompassing some of the Type II upgrades.

Do you know what happened to the ones i was meant to be sent? I have stickers PM me for deets Caylum

wow buddy. I was gonna put this up. Jumping the gun

Yes there is. Could change it

Also, big thanks to all that donate. We got $80.70 for lifeline.

Big thanks to everyone who popped along for the cruise. It was great to have such a bid turnout.

You jinxed yourself by saying you could attend so early on. The kiwi808 jinx haha

Still one more in December.

Yeah thats cool. Thanks for the heads up N3K.

Yeah thats cool as. Oh hell yeah! Good to hear Scott.