Me_19588

too high in front, front tyres too wide, and boost guage mounting looks a little rough

use ae92 front inserts, you have to use monroe inserts as they are smaller diameter and fit, kyb ae92 inserts dont fit as the are the bigger diameter. I have monroe in my ke25 struts, i brought kybs but they didnt fit

you can get 185/60/13 i have one on one of my hotwires, looks a lot nicer than the 205/60/13 i have on the others, is a noticable smaller in height compared to the 205s too

i have konig rewinds, 15x7 0 offset, they are about 12-1300 a set i believe

i will head in if i can find a full license passenger, should make it

positive 27 factory

Looks alright, might be just me but looks like you are missing a piece of chrome above the windscreen, think i saw a piece that looked like it would fit it was on the auckland motorway a few weeks ago

good to here u got those brakes sorted out, i gave up on them but i am just lazy. Will stop round and have a look next weekend

t series diff can fit just fits out a bit my t series came from an aa60 carina and it had 195/60/14 on 14x6.5 rwd offset rims in that photo, 17x7 fwd offset fit just under the small molded flares the car has, with 15x7 0 offset i am hoping to cover the tyres with 2 inch bolt on flares

Well i took possesion of Mr XXX's carina wagons, so far have just swapped over most of the bolt on panel from the ka67 on to the sx60 shell, got the springs captive all round so should be good for a wof, sits just over 100 mm off the ground. got a couple of patches to be welded in over some rust and should be all legal just sittin on some 17s at the mo, really need some old school wheels for it Here is some pics

might post up some pics of the carina, its looking quite good but too low at the back, got those 2 and a half coils you had as springs to be captive in the front so sits low, but the back is bout 70 mm lower and cant get it out of the shed

the 18s suit it so much better than the 15s i had on it, just wind the front down a bit more its still a bit high