NelsonEX Posted July 28, 2013 Share Posted July 28, 2013 HI there,Looking at buying a 1982 S110 Nissan Silvia for a new project. Unfortunately it has the 3spd auto box.Dont know alot about these cars so my question is what gearbox was used/will fit with the Z20 engine. Also is it a hydro or cable clutch setup?Cheers Quote Link to comment Share on other sites More sharing options...
kyteler Posted July 28, 2013 Share Posted July 28, 2013 Z or L-series boxes will work, an L-series box will fit on an angle though, not entirely upright but will work. L/Z series gubbins are hydraulic. Quote Link to comment Share on other sites More sharing options...
NelsonEX Posted July 29, 2013 Author Share Posted July 29, 2013 Sweet as thanks for that, what else would be involved in manual conversion? will I need a new master cylinder?Cheers Quote Link to comment Share on other sites More sharing options...
Sambo Posted July 29, 2013 Share Posted July 29, 2013 You will need: Gearbox Clutch Slave cylinder Clutch line Master cylinder Manual Brake Pedal Clutch pedal Appropriate interior (if you want it tidy) Quote Link to comment Share on other sites More sharing options...
HighLUX Posted July 30, 2013 Share Posted July 30, 2013 Driveshaft? Quote Link to comment Share on other sites More sharing options...
kyteler Posted July 30, 2013 Share Posted July 30, 2013 Depends. I didn't on my C110 but it's a bit older but I did on my S12, which is a bit newer but in the same family. You may or may not need to modify a crossmember also. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.