Taddis Posted February 23, 2012 Share Posted February 23, 2012 how do i get these wheels LOOK LIKE THESE Quote Link to comment Share on other sites More sharing options...
durty Posted February 23, 2012 Share Posted February 23, 2012 http://coupekiwi.com/2010/05/04/wheel-polishing-guide/ Quote Link to comment Share on other sites More sharing options...
flyingbrick Posted February 23, 2012 Share Posted February 23, 2012 you need double the dish to begin with. Quote Link to comment Share on other sites More sharing options...
kpr Posted February 23, 2012 Share Posted February 23, 2012 ^ +1 for simons guide i usually sand them by hand, starting off coarse to fine as above. then do the final polish with a buffing wheel on bench grinder. coarse then fine grade polish. come up super shiny looks like those wheels have a clear coat, getting that off will be the worse bit.. if can find something that will strip it off without sanding will save alot of time Quote Link to comment Share on other sites More sharing options...
Chrome_GT Posted February 23, 2012 Share Posted February 23, 2012 I imagine one of those paint remover drill attachments will rip the clearcoat off no problem Quote Link to comment Share on other sites More sharing options...
kpr Posted February 23, 2012 Share Posted February 23, 2012 was more meaning something like paint stripper. something that wont mark the ali too much = less sanding and more winning Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.