rb drifter Posted February 24, 2012 Share Posted February 24, 2012 450, i bought a whole set and only want the fronts. so thats half what i payed for full set. Quote Link to comment Share on other sites More sharing options...
Escorto. Posted March 5, 2012 Author Share Posted March 5, 2012 Just made in the purchasing of a set of 15x8 0 offset D windows. Will update with pictures as soon as MACKAZ sorts me with some tyre deals and ive finished my 5 stud conversion... I need to get my rear dampers rebuilt so they are going to Autolign asap. D shaft loops are going in currently. Need to get this on the road. Skid withdrawls/ Eagers are to spendy! EDIT: Needs less profile, they're just the 205 60's that were on there. I'm gonna try borrow a guard roller off a mate today.. hopefully 1 Quote Link to comment Share on other sites More sharing options...
Guest Escorto. Posted March 15, 2013 Share Posted March 15, 2013 So I'm going a new direction with this. Introducing mexi ceff. I pulled the adjustables out, and put completely standard s13 suspension in. May get some lowering springs for it yet.. 195/55r15 front 205/60r15 rear. chassis is around 130mm of ground Have yet to paint the bumpers. so its a panda atm. Chur Quote Link to comment Share on other sites More sharing options...
Guest NicT Posted March 15, 2013 Share Posted March 15, 2013 What turbo do you have on it? Its a 20det aye? My one i had eons ago came with a T3/T4 and my god was it terribly laggy. Best thing i ever did was fit a HT-18 with a t3 rear housing, that lit a fire under its ass so huge it scared me. Hate to admit it but still the fastest car ive ever owned. Quote Link to comment Share on other sites More sharing options...
Escorto. Posted November 5, 2013 Author Share Posted November 5, 2013 Wow this was a long way down the list!! These turned up today. just need to go see mackaz and get my tyres/ alignment. Then use my mates hoist to put the d shaft loops on then shes ready for cert hopefully. Quote Link to comment Share on other sites More sharing options...
Escorto. Posted November 5, 2013 Author Share Posted November 5, 2013 Ok so I was just having a look under this beast. The lower arms are well past horizontal. It handles good as is. will rca balljoints make it handle better. Is it worth doing. They're $190 od a pair. And the same for the rear ones. what ya'll think? Quote Link to comment Share on other sites More sharing options...
Truenotch Posted November 6, 2013 Share Posted November 6, 2013 How bad is it? Having correct roll centre is something that makes sense on paper, but you can often dial out the effects of bad arm angles with harder springs... Don't know if it's worth bothering for a skid hack? Unless the certifier doesn't like it. Quote Link to comment Share on other sites More sharing options...
Escorto. Posted November 6, 2013 Author Share Posted November 6, 2013 Lets just say its not good. Haha I'll chuck a pic up of the angle tomorrow. Springs are pretty hard. The front is the worst angle, Backs not too bad. Quote Link to comment Share on other sites More sharing options...
DB8-TypeR Posted November 6, 2013 Share Posted November 6, 2013 Thought I would say that there is a R32 sedan around town with the same wheels as yours, bolt on flares and lots of low. It looks great. Quote Link to comment Share on other sites More sharing options...
J-Calico Posted November 21, 2013 Share Posted November 21, 2013 Have the Hardrace arms been through certification before/you don't have to have them tested?Their stuff does look nice, and also to be good quality I like much of GKtech's range, but hear that it may not have been tested for certs, so someone needs totake one for the team and have a set of each adjustable arm or whatever they want to use, tested? The manifold should be fine, I hear the stories too, but actually have yet to personally experience, or even see it myself..The tidier and shorter inlet track is worth it, especially on a 20... 2 Quote Link to comment Share on other sites More sharing options...
Escorto. Posted November 21, 2013 Author Share Posted November 21, 2013 Yes i think the arms are all certable, Clint reccomended them to me so he'd know. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.