Truenotch Posted July 3, 2009 Share Posted July 3, 2009 Pics? ... does your have a leg gaurd Broke one of the exaust bots last night DOW so got to work out how to get that out tommorrow. 2 new tyres and all new pads monday mean. Sand down the needle, make an exhaust with a small coby as expansion chamber with a tiny exit pipe. Then roll with "choke" open at full throttle and gain 7-10kph. Mines a blue one, with blue seats and white guards. 2 speed trans from FS with the big wheel on the back = 70kph on the flat when it was fresh. Was lucky cause mines a late model with the different rear spindle so the wheel went straight on to the FS box. Pics when I can be bothered . Quote Link to comment Share on other sites More sharing options...
tortron Posted July 4, 2009 Author Share Posted July 4, 2009 success of the ringadingding variety Quote Link to comment Share on other sites More sharing options...
My name is Russell Posted August 8, 2009 Share Posted August 8, 2009 So i have a spare engine + an idea that probably wont go much further than this ...but forced induction? whats a tiny turbo i could have a go at fitting or is this just a dump idea that wont work very well? Quote Link to comment Share on other sites More sharing options...
tortron Posted August 8, 2009 Author Share Posted August 8, 2009 have looked into this get a vacuum cleaner and use the pump part from that Quote Link to comment Share on other sites More sharing options...
My name is Russell Posted August 8, 2009 Share Posted August 8, 2009 Sweet have an old one lying around will pull it apart 6 volt hear dryer? Quote Link to comment Share on other sites More sharing options...
tortron Posted August 8, 2009 Author Share Posted August 8, 2009 my idea was to mount a belt to the stator Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.