peteretep Posted April 6, 2009 Author Share Posted April 6, 2009 yeah definately possible, need to do something about one of the mounts not sitting flush on the face though, its at a different angle as seen in the middle pic Quote Link to comment Share on other sites More sharing options...
mkcortina Posted April 6, 2009 Share Posted April 6, 2009 these are my old mounts which i wont need now as ive gone worldcup mounts. They are a V6 rubber on a escort mount. measurements are if you have the ruler inline with the bolt. 80mm from the block to the rubber mount 110mm from block to the end of the rubber mount. If you want to borrow them to see if they will work let me know. Quote Link to comment Share on other sites More sharing options...
peteretep Posted April 6, 2009 Author Share Posted April 6, 2009 just checked my lengths, 3 out of the 4 mounts i have are 120mm, definately need bigger haha Quote Link to comment Share on other sites More sharing options...
mkcortina Posted April 6, 2009 Share Posted April 6, 2009 I thought i better show how i measured it. Quote Link to comment Share on other sites More sharing options...
peteretep Posted April 6, 2009 Author Share Posted April 6, 2009 yeah same as i measured it Quote Link to comment Share on other sites More sharing options...
mkcortina Posted April 6, 2009 Share Posted April 6, 2009 Must be the block. Quote Link to comment Share on other sites More sharing options...
sentra Posted April 6, 2009 Share Posted April 6, 2009 burn ruybber off bolt remainder in box up mounts in situe pour in urethane? Quote Link to comment Share on other sites More sharing options...
durty Posted April 6, 2009 Share Posted April 6, 2009 /solid mount Quote Link to comment Share on other sites More sharing options...
sholdowa Posted April 6, 2009 Share Posted April 6, 2009 the 711m block engine mounts are about 11mm wider than the 681f. The difference is on the exhaust side. Edit: That's the block width mount to mount. So you need to lengthen the exhaust side mount by about 11mm. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.