skunkwerx Posted July 14, 2005 Share Posted July 14, 2005 ok just before i even try to take it off can i get it by the crossmember?? is running a 4g52 and the gasket is leaking rather alot,i hope the engine dont have to come out just to do it:) Quote Link to comment Share on other sites More sharing options...
lowlancer Posted July 14, 2005 Share Posted July 14, 2005 Damn, doubt it. Just whip it out, may as well, and replace it with a 4G63 while you're there! Quote Link to comment Share on other sites More sharing options...
Ogre Posted July 14, 2005 Share Posted July 14, 2005 get a real big hammer and hit the shit outa it. If that dotn work then use a bigger hammer. Nah. You can get the sump off if you choke the motor up.Have to undo the engine mounts and then get a peice off wood behind the sump on that flat sorta peice infront of the gearbox bell housing, then use a trolly jack to jack it up. Ive never actually taken the sump off b4 without the motor actually being out of the car, but this is how the manuel says you can do it. Im presuming your car is a RWD galant/sigma. Good luck Quote Link to comment Share on other sites More sharing options...
skunkwerx Posted July 14, 2005 Author Share Posted July 14, 2005 yeah it off a rwd galant,seems stupid that you have to remove the engine just to get at the sump??/ Quote Link to comment Share on other sites More sharing options...
lowlancer Posted July 14, 2005 Share Posted July 14, 2005 Well the sump is at the bottom, makes sense really. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.