tortron

1 BMC is also available

suit you sit, suit you https://www.trademe.co.nz/a/motors/car-parts-accessories/personalised-plates/listing/3237655409?bof=bkJmwL1O got that morris marina mainia

Bog absorbs water. Primer absorbs water. Decent epoxy like durapox, and then don't let it sit about outside before getting top coat on

YoEddy would need a lot of gloves to cover a whole head

My touring bike was originally racing green and is now rivergum Two tone of that red and blue

Really it's just wanting heat so some nichrome wire and a power source, then press it on would pro a ly work

I agree, but maybe work for going in a microwave

Yea I'm not totally in love with it, would sell Waiting on parts before I do anything much

i believe its just conductive ink, you could try a circuit repair pen

diy my man

just applying the linseed oil? no sanding/polishing?

still running a generator on it? probably the battery has had a hard poorly charged life and is passed it 9.5v under load is right at the time to look for a new battery stage

How many hours running tho

Gt40 fine, gt40R not fine

Pertronics set ups want minimum 3 ohm coils if I remember correctly, can't use a coil that was for a ballest resistor system (i. E if it's a gt40R) The high performance coils also caused problems, due to the output

simple green has been doing some good things to my oily filth, cleaned my oil soaked carpets out with it and no complaints

fwiw, 9.6v is about the lowest you would expect an ok battery to drop when cranking

thats an excessive voltage drop on the battery, probably its on its way out. A battery load tester is about $20 if you want another gadget for the shed, or can take it to a supercehap or whatever to test assume you have the correct ohms coil for the electric distributor, and have gotten rid of the ballast resistor

lol, you all know you have to buy cool tyres then mod the bike to fit

re: battery reviving jfc

I'm told they are pretty indestructible, don't have the 750 or 400 tax either, but AFAIK they are "the same"

https://www.trademe.co.nz/a/marketplace/toys-models/die-casts/dinky/listing/3227295313?bof=R8MumI06

suzuki is ready to go but am considering putting some knobbies and a light bar on one of these