hillman1

Hey guys just dropped a new motor in my ke20 2tgeu 1600 dohc as the old one blew up now iv gone to start it and it's hard to start and blowing heaps of black smoke when it's runing any ideas on what may be causing it it won't rev at all ether ?

Are the standard 3t pistons thick enough to be fly cut I was led to belive they are to thin and like to crack

What's the best method bug blob of bluetack?

Yea they seem to have a way deeper cutout than standard 2tg and 3tb pistons spoke I will just have to try and check clearances

Hey guys half way trew building g a 2tg 3t hybrid just not shore what pistions to use have searched the net but on flicking Info iv got complete 2tg and 3tb motors so just need to know if I can use the 2tg pistions on the 3tb rods or will I need to get the 3tb pistions fly cut to suit the 2tg head? Also are the standard 2tgeu injectors still alright tk be used or will I need to go bigger?

Good to hear man

Yea mate that's the guy I got it off long gone now tho how's my hillman coming along

Hey guys just got a Volvo 360 just wondering g if anyone knows what my options are for turboing it its the 2l Efi model just wondering if any other exhaust manis fit maybe off later model turbo 940 etc etc any help is much appreciated

How it going over there guys big turn out? Might make an appearance in the daily

Yea fuel pump is mint it will big down if I push the flap to much it will stall out

Yea can slowly move afm flap with trottel and it will rev a bit more fuel pressure reg is allgood but dose fluctuate at idle th wiring is dodgy as fuck but every thing is geting back to ecu if you get what I mean will have a look at the tps and see if it is worn I have tryed a spare tps but there was no difference at all realy do t have that much time to play with it every thing is half done but I want to get it runing properly before I tidy everything up

Ok so got it runing now fires up first pop idels all over the show tho and won't rev no difference with afm plugged in or unplugged guessing that's th issue

You will with 3inch blocks but 2inch is ok just get the leaves reset better ride that way

Be fine like that bro no need to cert if front springs are still captive

Where abouts will it be held what time dose it start etc