mikey205 Posted August 8, 2014 Share Posted August 8, 2014 Hey guys. Im lowering my gx71 tryn to get as low as i can 50-40 mls of the ground. Was wondering if theres any springs that i can get instead of getting falcon ones an cutting them. Any ideas would be sweet Quote Link to comment Share on other sites More sharing options...
Mitch.W Posted August 8, 2014 Share Posted August 8, 2014 custom ones. there are no real off the shelf options go get that low, you might be able to use bc mx73 rears, but they cost $900 Quote Link to comment Share on other sites More sharing options...
chees- Posted August 8, 2014 Share Posted August 8, 2014 if you're trying to go that low just get bcs all round, you're gonna have issues certing it that low so having the ability to lift it is wise. Quote Link to comment Share on other sites More sharing options...
mikey205 Posted August 8, 2014 Author Share Posted August 8, 2014 Custom as in cut haha i dont mind doing.cut just hope the cert guy dosnt pick up on it. What about compressed lowering springs? Quote Link to comment Share on other sites More sharing options...
mikey205 Posted August 8, 2014 Author Share Posted August 8, 2014 Cant do adjustys in the back. Quote Link to comment Share on other sites More sharing options...
chees- Posted August 8, 2014 Share Posted August 8, 2014 Cant do adjustys in the back. what? do some research   also cut springs are fine for cert in these things, they have spring seat design thats fine with it. have had multiple cert guys say its fine. Quote Link to comment Share on other sites More sharing options...
ta63-1uzze Posted August 8, 2014 Share Posted August 8, 2014 "bc Cressida mx73" . bolt in rear, weld on front. 1500 bucks from redline performance. they will fit your beast (if I am wrong then someone will pipe up no doubt) . Â as for going 40mm low I don't think even adjustable will do that out of the box. 70/80mm is a nice height ,I cant see anyone loving driving on nz roads at 40mm, its a bit on the silly side isn't it ? Â Â Quote Link to comment Share on other sites More sharing options...
chees- Posted August 8, 2014 Share Posted August 8, 2014 "bc Cressida mx73" . bolt in rear, weld on front. 1500 bucks from redline performance. they will fit your beast (if I am wrong then someone will pipe up no doubt) . Â as for going 40mm low I don't think even adjustable will do that out of the box. 70/80mm is a nice height ,I cant see anyone loving driving on nz roads at 40mm, its a bit on the silly side isn't it ? they should with keepers and some persuasion. 50-60mm is comfortable, 40mm and below is when its gets tricky. Quote Link to comment Share on other sites More sharing options...
Hachi-ichi Posted August 8, 2014 Share Posted August 8, 2014 cert guy most certainly will pick up on cutties Quote Link to comment Share on other sites More sharing options...
mikey205 Posted August 8, 2014 Author Share Posted August 8, 2014 Sweet thanks for the help. Will look into it some more. Nah 40 or 50 will sweet. Ive got other cars to on long trips for haha Quote Link to comment Share on other sites More sharing options...
chees- Posted August 8, 2014 Share Posted August 8, 2014 Sweet thanks for the help. Will look into it some more. Nah 40 or 50 will sweet. Ive got other cars to on long trips for haha you may also want to check the camber laws and other things. its not easy to cert these things low. Quote Link to comment Share on other sites More sharing options...
mikey205 Posted August 8, 2014 Author Share Posted August 8, 2014 Sweet cheers bud ill go suss out my cert guy down my road Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.