hillman1 Posted April 18, 2014 Share Posted April 18, 2014 Just curious as to the best place to get starter signal from is for ecu ? All that's stoping me from going back to efi Quote Link to comment Share on other sites More sharing options...
eke_zetec_RWD Posted April 18, 2014 Share Posted April 18, 2014 Umm if there's such a thing then the wire between the key and the starter solinold Quote Link to comment Share on other sites More sharing options...
hillman1 Posted April 18, 2014 Author Share Posted April 18, 2014 Sweet that's what I was thinking defiantly called starter signal on all wiring diagrams I can find just wanted to double check before hand to save from posably frying ecu Quote Link to comment Share on other sites More sharing options...
downtrail Posted April 18, 2014 Share Posted April 18, 2014 Yup the exciter wire or the +12v control cable if the start exciter is on a relay. Quote Link to comment Share on other sites More sharing options...
hillman1 Posted April 19, 2014 Author Share Posted April 19, 2014 It's just wired onto a switch no relays so just bridge a wire from the output side of the switch to wiring harness with a fuse in between say 15amp? Quote Link to comment Share on other sites More sharing options...
downtrail Posted April 19, 2014 Share Posted April 19, 2014 yeah 7.5a 10a will be fine fuse is only there to protect the cable not the equipment connected so just rate it to cable size you are using. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.