cute wee gem Posted April 6, 2012 Share Posted April 6, 2012 Will 1/4 inch/6mm fuel line be big enough to support 200ish hp @ the flywheel? This is for after the EFI pump (under pressure) but can run a bigger hose from surge tank to the pump. Engine is a 2l Piazza turbo + VF24 Quote Link to comment Share on other sites More sharing options...
Yowzer Posted April 6, 2012 Share Posted April 6, 2012 I read up on this stz awhile back, and I think you'd want 3/8th for that. 1/4 is pretty tiny. Quote Link to comment Share on other sites More sharing options...
CaMpylobacter Posted April 6, 2012 Share Posted April 6, 2012 yeah i would've thought at least 5/16 (8mm) as a minimum. Quote Link to comment Share on other sites More sharing options...
RUNAMUCK Posted April 6, 2012 Share Posted April 6, 2012 I ran into fueling problems with 6mm line with 125hp@tw. Quote Link to comment Share on other sites More sharing options...
Yowzer Posted April 6, 2012 Share Posted April 6, 2012 Sorry 5/16th is what I meant. 3/8th is a bit overkill for 200hp. It's what you'd want for cabie though. Quote Link to comment Share on other sites More sharing options...
cute wee gem Posted April 6, 2012 Author Share Posted April 6, 2012 Sweet, picked up some 5/16 from bnt today Time for some dirt in the eyes Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.