danger Posted February 1, 2012 Share Posted February 1, 2012 Need the fucker off the tailshaft so I can put a new bearing in. Wont budge. Any ideas? Quote Link to comment Share on other sites More sharing options...
My name is Russell Posted February 1, 2012 Share Posted February 1, 2012 Have you removed the pin thingy i forget the name of? Quote Link to comment Share on other sites More sharing options...
danger Posted February 1, 2012 Author Share Posted February 1, 2012 It doesn't have a roll pin or anthing. Quote Link to comment Share on other sites More sharing options...
ESKIN8R Posted February 1, 2012 Share Posted February 1, 2012 They have a circlip stopping it from coming out of the housing and a cap on the oposite side you take out and punch it out once circlip removed Quote Link to comment Share on other sites More sharing options...
danger Posted February 1, 2012 Author Share Posted February 1, 2012 No, not that gear. I've dismantled the box. I need the worm drive gear that it spins off to come off the main shaft so i can get the bearing off that sits behind it. Tried heating it, fuckers as solid as a rock Quote Link to comment Share on other sites More sharing options...
danger Posted February 1, 2012 Author Share Posted February 1, 2012 gonna make up a bracket and try in a shop press tomorrow Quote Link to comment Share on other sites More sharing options...
danger Posted February 7, 2012 Author Share Posted February 7, 2012 Wouldn't work in shop press, just buzzed a weld around it, still cant get off. one of the splines blew into shrapnel from me hitting the end of the shaft (squarely) Time to give up and find another box... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.