craig_b Posted January 29, 2012 Author Share Posted January 29, 2012 also i want to contact these T3 guys, they have their number listed as " please call us at (530) 626-7334 " what number do i have to put infront of that ? cant say ive ever made any international calls haha Quote Link to comment Share on other sites More sharing options...
Shandangles Posted January 29, 2012 Share Posted January 29, 2012 ^ craig, email them. 86 camber plates bolt into a z10 Quote Link to comment Share on other sites More sharing options...
craig_b Posted January 29, 2012 Author Share Posted January 29, 2012 need to ring to pay buy credit card, also been told 86 camber plates dont fit?? either way still probably be the same price/cheaper only downer could be delivery time as i want to get the soarer sorted by the 19th of feb Quote Link to comment Share on other sites More sharing options...
Shandangles Posted January 29, 2012 Share Posted January 29, 2012 must have changed then, iv emailed them and paid by credit card and paypal heaps. the adjustables i had in it back in the day were straight out of my ae85..... they were k sport insert type so went into the z10 strut. his email address is ggtyler@yahoo.com Quote Link to comment Share on other sites More sharing options...
craig_b Posted January 30, 2012 Author Share Posted January 30, 2012 anyone able to measure up some ae86 camber plates? this is how the soarer ones look.... .... been told the ae86 ones are 108mm and 80mm so not a perfect triangle like the soarer.. anyone else able to coment on this as it will be much quicker to get ae86 ones in nz rather than some from overseas Quote Link to comment Share on other sites More sharing options...
kpr Posted January 30, 2012 Share Posted January 30, 2012 got s13 in trueno. quick measure they are roughly 90 105. so those numbers sound right for ae86. as ive slotted 2 of the holes a bit to fit s13. easy enough to redrill the plates or the car (spin them 180) also ae86 ones the triangle points to center of the car, unlike your pic edit pic Quote Link to comment Share on other sites More sharing options...
craig_b Posted January 30, 2012 Author Share Posted January 30, 2012 bummer, maybe i should just buy from the states, dont really want to drill unless i have to Quote Link to comment Share on other sites More sharing options...
flyingbrick Posted January 30, 2012 Share Posted January 30, 2012 man drilling holes in your strut towers would take all of 5 minutes total. Or just get wheels that fit proper. Quote Link to comment Share on other sites More sharing options...
Mr dori Posted January 31, 2012 Share Posted January 31, 2012 Just s13 man, drill holes in tower, cover with strut brace. done Quote Link to comment Share on other sites More sharing options...
craig_b Posted February 1, 2012 Author Share Posted February 1, 2012 found a place that sell blank camber plates so just going to see them once a couple of the engine bits and pieces are done, hopefully have it fired up this weekend if the wiring is stright plug in and turn key Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.