kurtis1791 Posted June 8, 2011 Share Posted June 8, 2011 am looking to fit an electric fuel pump to my mates ex lancer which we have just put a 4g52 into. we need to find a suitable electric fuel pump for the job to run a set of original 4g52 twin carbs. any suggestions greatly appreciated. Cheers Kurt Quote Link to comment Share on other sites More sharing options...
peteretep Posted June 8, 2011 Share Posted June 8, 2011 I run one of these, repco sells them and im sure others do http://www.facet-purolator.com/index.ph ... &Itemid=31 Quote Link to comment Share on other sites More sharing options...
dwlee Posted June 9, 2011 Share Posted June 9, 2011 I used to run a facet on a GTO no problems. The pump pressure should be in the range 4.5 to 6 psi and flow around 120 Lph. Make sure you use soft rubber mounts otherwise they can be very loud. Quote Link to comment Share on other sites More sharing options...
2JZKP Posted June 10, 2011 Share Posted June 10, 2011 yep facet def good way to go, ran my sohc 4g63 ex lancer with weber 32/36dgav no probs, and also ran my l300 with same motor easy, used one for a lift pump for surge tank setup in my old kp starlet also perfect, yes def rubber mount then as they bit on the noisey side Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.