bubblegoose Posted November 8, 2010 Share Posted November 8, 2010 yeah so ive got a bare core to make my own rad issue the tubes and fins are vacuum brazed or some crap and im bitchin about melting this when i weld it the guys at the rad shop are all yeah theres a trick to it, bring it here/$300 anybody welded there own/know the trick, ill braze the tanks on if i have to but welding would be more menkoan Quote Link to comment Share on other sites More sharing options...
Jase Posted November 9, 2010 Share Posted November 9, 2010 i dare say they purge it with an inert gas and weld it up , the purge will cool the weld before it penetrates to deep and stops oxidisation? in the weld. thats how it works with tig on stainless dairy tube at least Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted November 9, 2010 Author Share Posted November 9, 2010 was going to purge anyway but the welds are damn close to the brazing not sure it will be enough but then i dont even know what temperature this stuff will melt at Quote Link to comment Share on other sites More sharing options...
kpr Posted November 9, 2010 Share Posted November 9, 2010 chop some cores off the end of my chinese one, and tig'd the shit out of it welding new sides on the tanks. no tricks, no leaks. i actually welded over the top and bottom, of one of the cores to blank it off, welded fine. possible its bonded different than yours though? Quote Link to comment Share on other sites More sharing options...
eke_zetec_RWD Posted November 9, 2010 Share Posted November 9, 2010 nah its mint. go hard. dnt need to perge or anything. send to me $295 Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted November 9, 2010 Author Share Posted November 9, 2010 nah its mint. go hard. dnt need to perge or anything. send to me $295 ill go hard, if it melts, ill send to you to fix, and ill jab you in the gums with me screwdriver Quote Link to comment Share on other sites More sharing options...
eke_zetec_RWD Posted November 9, 2010 Share Posted November 9, 2010 nah its mint. go hard. dnt need to perge or anything. send to me $295 ill go hard, if it melts, ill send to you to fix, and ill jab you in the gums with me screwdriver out of interest where core from? Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted November 9, 2010 Author Share Posted November 9, 2010 nah its mint. go hard. dnt need to perge or anything. send to me $295 ill go hard, if it melts, ill send to you to fix, and ill jab you in the gums with me screwdriver out of interest where core from? got a bare core from A1, they dont normaly sell bare cores, except to me because i suck dick lots/used to spend monies 550x330x74 Quote Link to comment Share on other sites More sharing options...
T-Rex Posted November 9, 2010 Share Posted November 9, 2010 Give it to me you wana be prick, Ill add two times tanks to it. Get Zeb/Rawb to bring it down etc. PurGANG will do nothing Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted November 9, 2010 Author Share Posted November 9, 2010 Give it to me you wana be prick, Ill add two times tanks to it. Get Zeb/Rawb to bring it down etc.PurGANG will do nothing ned to be >2mm, if you put 3mm tanks on ill stab your face/do i even trust you/no not really/its too big for your soarer/whos going down next/fag Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.