stacy Posted October 12, 2010 Share Posted October 12, 2010 hey there has any one converted a magna fwd 2.6 into a l2oo? bell housing needs to go up about 20 mm any one had success with this before thanks Quote Link to comment Share on other sites More sharing options...
CUL8R Posted October 13, 2010 Share Posted October 13, 2010 Excuse my ignorance but Im sure you can get 2.6 astrons in l200's anyway... Wouldn't you just use one've those to start with? Quote Link to comment Share on other sites More sharing options...
stacy Posted October 13, 2010 Author Share Posted October 13, 2010 yeah thats true, i have picked up a magna 2.6 to replace the l200 2.6 with a rod in through the block,i brought it thinking they were the same which they are except the bell housing top holes are 20mm lower,there is room to drill and tap the block to mount gear box and was just curious if any one had had any experience with doing it,the new engine i scored has been reconditioned and for $250 bucks was too good to turn down Quote Link to comment Share on other sites More sharing options...
Ogre Posted October 14, 2010 Share Posted October 14, 2010 try:http://www.sigma-galant.com its an ozzy site but the play round with the 2 and 2.6 mitsi engines as they didnt really get the 4g63s etc.They are always blahing on about astron 1s and 2s and 3s whatever the hell that means. I know there are issues with wide and narrow bell housings with those engines, sounds like you may have that issue. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.