bubblegoose Posted December 22, 2009 Share Posted December 22, 2009 need some bushes for the lancia tailgate hinges 10mm OD 8mm ID need 6 bushed 10mm wide or just a 100mm long length and ill chop to suit would like asap so i can get the tail gate back on and make it watertight again Quote Link to comment Share on other sites More sharing options...
KKtrips Posted December 22, 2009 Share Posted December 22, 2009 try Bay Engineers - they have a variety of pre made bushes like this I believe - or that is rather small with a 1mm wall thickness.. Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted December 22, 2009 Author Share Posted December 22, 2009 it is a bit small for off the shelf stuff also the reason the collapse and bend the hinges and tailgate Quote Link to comment Share on other sites More sharing options...
84_S12 Posted December 22, 2009 Share Posted December 22, 2009 You could most likely buy them off the shelf frrom Wilson Bros dude (Heavy duty enough for me to consider a set for brass drifts) Quote Link to comment Share on other sites More sharing options...
smokin' joe Posted December 26, 2009 Share Posted December 26, 2009 off the shelf at an engineers, only 60mm long though. use them all the time for re-building D21 Navara hinges. it's bronze you want , as brass is too soft. Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted December 26, 2009 Author Share Posted December 26, 2009 sorted Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.