Scrubb Posted June 2, 2009 Share Posted June 2, 2009 Does anyone know where I can get a starter motor reconditioned? It spins but the gear comes out real slow and I guess it doesent have enough oomph to engage as I can hear tyhe starter motor spinning but engine not turning over, but on the bench the gear come out ok but slowly. Quote Link to comment Share on other sites More sharing options...
Hemi Posted June 2, 2009 Share Posted June 2, 2009 if it just an inertia type motor , pull it apart yourself mang. prob just shit caught up in the helix Quote Link to comment Share on other sites More sharing options...
forced Posted June 2, 2009 Share Posted June 2, 2009 Give it a clean. Steve Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted June 2, 2009 Share Posted June 2, 2009 see ar see lots Quote Link to comment Share on other sites More sharing options...
forced Posted June 2, 2009 Share Posted June 2, 2009 In my opinion, CRC is good for soaking rusted nuts and that's it. Shit sticks to it and makes things worse again. Kero is good for cleaning inertia starter motors, then put it back in dry. If it's getting gunked up then maybe you've got a leak in either the gearbox or rear crank seal. Steve Quote Link to comment Share on other sites More sharing options...
Yowzer Posted June 3, 2009 Share Posted June 3, 2009 Replace it with a hand crank Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.