bubblegoose Posted January 30, 2010 Author Share Posted January 30, 2010 some crazy ceramic shit right there requires high baking temperatures lots of pictures because we all love pipework Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted February 1, 2010 Author Share Posted February 1, 2010 YAY! Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted February 3, 2010 Author Share Posted February 3, 2010 got my eyes on that mofo......shame i need tyres Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted February 6, 2010 Author Share Posted February 6, 2010 thought id make a heat shield for teh fire wall and stuff. note also water outles welded onto water pump to avoid rangi hacking of fwd pipework then fitted my 'close tolerance' zorst took my fucking hours to get them on and scratched the shit out of most things in the engine bay and had to unbolt engine aswell Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted February 7, 2010 Author Share Posted February 7, 2010 hammertime wasnt enough Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted February 11, 2010 Author Share Posted February 11, 2010 filled engine with oil took cambelt off again put drill on oil pump coverd floor with million oils im missing two blanking grub screws from the zorst side of the block POOS! have also made a pretty sweet gauge cluster for new dash, painted fuel gauge all black and replaced empty with a red dot, replaced water temp gauge with autoMETER ARF gauge rotated 90' and blacked out for max hidden spec Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted February 15, 2010 Author Share Posted February 15, 2010 oioioi? shoud stiffen it up a bit... when tape becomes plate and weld Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted February 27, 2010 Author Share Posted February 27, 2010 screen out for rear end choppage Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted May 3, 2010 Author Share Posted May 3, 2010 meh Quote Link to comment Share on other sites More sharing options...
BobbyBreeze Posted May 5, 2010 Share Posted May 5, 2010 Bubblejuice says safety first (and stay in school) Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted May 5, 2010 Author Share Posted May 5, 2010 oh hai saftygoose Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted May 7, 2010 Author Share Posted May 7, 2010 i have a yellow friend Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted July 5, 2010 Author Share Posted July 5, 2010 motivation being sponsored by the colour purple watch this space Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted July 6, 2010 Author Share Posted July 6, 2010 wassis? oh. Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted July 11, 2010 Author Share Posted July 11, 2010 so that ^ was me making a jig to bolt my subframe too then the jig got attacked with a drop saw and 100mm removed, measured carefully with my eyes to make sure its still all boshty and welded back together then the subframe got the drop saw treatment and the usefull ends bolted back to the jig more has been done/its short now i just dont have any pikychurs that will bring the diff to 1400mm about right for my ryums (its a 4wd rear aswell so running 14x14s will be easy as pye) AHAHAHAHA! yeah Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted August 13, 2010 Author Share Posted August 13, 2010 and what is this? Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted August 19, 2010 Author Share Posted August 19, 2010 started making a TREX stainless strut brace got the subframe down to a respectable 1350mm but welded and diamond plated doesn't quite line up in some places so some stiffening was added (and a bit more will be) still rough and unfinished but its going to get thrown around a bit now so im not getting worried till the end have some 20v itbs and a 12mm flange to play with aswell Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted September 2, 2010 Author Share Posted September 2, 2010 when angle grinders attack! started this diddle and thought its be cute to do this that is all for now lubs xx Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted September 8, 2010 Author Share Posted September 8, 2010 dont expect any updates any time soon Quote Link to comment Share on other sites More sharing options...
bubblegoose Posted September 9, 2010 Author Share Posted September 9, 2010 but what is this? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.