LingLing

Danger, Not really much point to post in my thread if you don't really want to help with my questions.

yehyehyeh. anyone have some helpful thoughts please? Have a guy could do cut and weld without removing the fuel tank.

sounds nice, yehp ok i will have it if it isn't too much trouble. where are you?

so here is the thing. This particular bit of rust is pain in the ass. I took it to a rust repair, he told me it's a double layer, the second layer looks very clean and he could cut and weld which requires the fuel tank to be removed. But he insists that using plastic bog is easier and much cheaper, and could be more rust proven as well. He also mentioned doesn't matter is welding or bogging. The rust might come back later because of the double layer, and he couldn't put fish oil in it. another question: Is there anyway to strip the bumpers paint, so I could get someone to restore the bumper to factory plastic with no Paint? any thoughts?

What's your beams engine redline? 8500rpm is insane!! F20C is only 9000!

Kpr, 4ages sounds awesome man. at least my bluetop sounds like a fucking thunderstorm. it has Cusco Extractor, Apexi Resonator and pretty decent looking Exhaust. You probably hasn't seen it tho.

Looks like a Whore house, doesn't look like a strip club. also ,be very careful all these ladies are pretty rough or mostly islanders.. just my 2 cents.

Hey man, it is a steal at the price you got it man. what is the boost you running for the 4agte? what turbo is it? also power?

Hope next time the weather will be better. Cold,wet,and windy.

so when you rev is freed to 8000, you can get 220-230kph?

wow, you on 6th gear and hitting the 6500 rev? what's the speed you were doing?

Just thought, This car isn't Hachikuro anymore... Apart from body panel, what else is it there from the 85/86? sick!

crazy, did you put FD suspension system into 85?

here is the link for bluetop manual. http://files.aeu86.org/manuals/4A-GEManual.pdf not exact, depending on your one is rear or front wheel. but the cover bit should be the same. I have only taken top and middle cover off, can't really say much sorry.

cut and weld the rust, it probably need respray as it got to the sill abit. spray isn't a issue, as I am going to respray the bumper and touch up paint of the car anyway.

right, Both quater glasses are off. I was extreamly careful about the second one, and trying to slide the trim off as much as I could, but yet still broke two of them. errrh. So in next few days, the rust will be fixed. then spray.

I have done some research before and the broken clips is the result.

sorry, maybe you have mentioned before: the front lip looks errrh, not ae86 road car like, you have a splitter under it right? and?

errrhh, anyone got any of these rear quater glass clips?? I broke 1 and half out 4. shit. Right Rear quarter glass is nearly out. Expecting this is the only rust. Btw, anyone have more reliable method to remove the window trim? without breaking my upper clips?

How many Engines Have you put in this car before man....

oh, I see , he put 7agte in there before, but the car is with 2jz now!

no more 2jz?

right Done. Piece of piss, only If I knew what I am doing.

Ok, hope I don't break it.

right taken upper cushion off, even slot the seats belt thru the lower cushion. so close to take it out. just don't know what to do with this thing ,lifted up down, left right, in and out , don't want to break it.