LAN_KILLA

deffinatly wired for an alternator. All the wiring seems to be correct, and doesnt appear to have been mucked with. Whats happening is that the charge light will show when the key is off, but as soon as its turned on the light will go out. If the alternator is disconnected the light will go out and remain out.

drinks in napier... might be keen... I somehow think i was the only one who saw the sign in one peice

whats your phone number man? ill give you a call

will do

Final Call for convoyers... Plan at this stage Me, ryanfels and possible uterus (if he wags tech), will meet at the Papakura service center at 10am, departing shortly thereafter... Will travel down SH1, turning off at Taupiri onto SH1B, will follow 1B into Hamilton and if any Hamilton peeps want to join they can meet us at Tramway Rd (just before East St - See Map above) around 11ish. After that we will rejoin SH1 in Hamilton and head to Tokoroa and catch up with Insani-T (if hes able to) to have Lunch, this will be around 1pm ish. Will continue onto Wairakei (the Steamy place) where we may pick up Testament (if he gets off work early enough). Then we will be off to Taupo for a final pit stop... then onto Napier where we will meet Lee... hopefully around 4ish If anyone wants to join the convoy (small as it may be) or wants a lift txt or call me on 021 295 4036 or 027 557 0012 so we can sort a meeting place and time.

might be able to tomorrow afternoon... PM me

might be possible... depends on how were going, might even be keen to stop for a feed there.... what is there to eat at in tok?

depends how many breakdowns/people we pick up on the way... id say 1-2pm ish

haha lol... anyone else going down friday???

Found a map....

Will probably scoot down 1B, so can go via hamilton. Want to meet on that last long straight of Gordonton Rd (I think it becomes Tramway Rd??? Just before east st) Say around 11.30ish??? Unless youve got a better idea for a meeting place...

Anyone keen to do a convoy to Napier from Auckland on Friday of Labour weekend? Plan thus far is to meet at the Papakura Service center around 10am, head to Taupo, grab a feed then onto Napier... Whos keen? I guess we could make a stop offs along the way for others to join...

is it running lucas electics? and is it +ve or -ve earth? If so then normally a brown wire is one that has constant +12V (So is connected to the solenoid on the same post as the battery terminal) Those brown ones youve earthed are probably your headlights or some other accessory that isnt key controlled

Hey Boes, I got OS member Josh staying here tonight (at the bodom concert atm) and tomorrow night... Any one keen to meet up and get OTP tomorrow night (Friday 27th), Josh is pretty k33n.... My place or suggest a venue

My Couch LOL, Im 5mins/$20 Taxi from city center, but seriously.... offers there if needed/wanted

Regulator will be most likely a little tin box behind the dashboard

tough out of luck there then. Will just have to settle for something else

HAHAHA, Wont be a keg, will be a decent number of boxs in my fridge though.

Beer or pre-mix's, what ever ya want

Well ive set a date to do the clutch April 12th (and possibly 13th if its a cunt of a job). As much help as possible would be appreciated if your free that weekend. Will probably use dads garage at this stage, unless someone knows of a workshop we can borrow. And remember, FREE BOOZE at my place afterwards

This is just a EA71 Motor (1.6L OHV/Pushrod Carby) with heaps of space around it, im not sure yet either. Thought that may be the case (have to do the same with the mini when i remove them)

Hi Guys I need to replace the clutch in the Leone, or im not going to make it to track day Anyone want to give me a hand with this one weekend in the next month or so? Beers at my place up for offer A 2 post hoist would be mean as, but not a requirement Its a FWD, but North - South engine, so shouldnt be too hard (will be more like a RWD car clutch replacement, but cv's may have to come out, depending how far the box needs to go back)

Ill be rolling down friday as well, not really concerned about time. Auckland boes going to meet at like the dury service center or someshit?

Seriously, dont do it yourself... Quite a few years back now, there was an incident on an Auckland Motorway, where a truck suffered driveshaft failure, due to an incorrectly lengthend driveshaft. The truck spat the shaft out the side while doing 90kph, shaft went onto the otherside of the motorway, and impaled a guy in the head in his ute, the ute cab was serverly shortened as was the guys life. Simply put, Never mess with a rotating mass, always get a pro to do it.