danger Posted October 19, 2022 Share Posted October 19, 2022 Nice! FXRs will be worth holding on to Quote Link to comment Share on other sites More sharing options...
mutiny Posted December 3, 2022 Author Share Posted December 3, 2022 Not a whole deal to report. Took it for a wee blat the other night . It's running like a dream. Had a look at date stamp on tires and the fuckers were getting pretty old so just slapped oh some fresh rubber 7 Quote Link to comment Share on other sites More sharing options...
mutiny Posted February 3, 2023 Author Share Posted February 3, 2023 Just picked up a set of alloys for the bike. Will chuck some wheel bearings in soon . Should change the look significantly. Ironically I just spent a small fortune getting the rear wheel rebuild with stainless spokes 5 Quote Link to comment Share on other sites More sharing options...
mutiny Posted April 12, 2023 Author Share Posted April 12, 2023 Still havnt got the alloys fitted. Machined up some spacers and installed the new wheel bearings. Need to machine my front rotors down to fit the alloys so that's on the back burner for now. Trying to decide to get them powder coated or not. My new intake showed up tonight. 92 was a intersection year for the evo motor. Some came out with head breathers some were bottom breathers. For some reason mine has been set up both so have set up the top breathers into the intake and am going to route the bottom breathers to vent out under the bike. I've been riding the crap out of the bike and loving every minute . Super reliable considering it's not far off ticking over 100 thousand ks. 9 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.