73crownwagon Posted September 7, 2013 Author Share Posted September 7, 2013 Shit be getting done son! Engine bay finally done what a fuck around, not my best work but its done now and it all unseen stuff so whatever! Bastard of a front cross member put back together fancy nolathane bushes Spat some paint on engine bay so all the welds arnt goin to rust. Put motor back together ready to go in today!!! Ill do another update tonight with motor in place 5 Quote Link to comment Share on other sites More sharing options...
73crownwagon Posted September 8, 2013 Author Share Posted September 8, 2013 Lowered the body over my new whitewall for a low shot haha Engine in! BOOM 7 Quote Link to comment Share on other sites More sharing options...
73crownwagon Posted September 10, 2013 Author Share Posted September 10, 2013 Bought a new radiator today, Finished side pipe this afternoon, might salami cut the end. Had a small muck up with one of the water hoses on the intake manifold being in the way of the engine cover, Checked my spare intake manifold and it had different placement of the hose outlets so ill swap them out. Still have a few things to do before fire up : bleed brakes : install new radiator : swap out manifold : make trans mount (have everything for it just have to drill holes) : make rose joint transmission extension : finish the small amount of wiring 8 Quote Link to comment Share on other sites More sharing options...
73crownwagon Posted September 11, 2013 Author Share Posted September 11, 2013 Trans mount 90% complete now, just needs a few bolts which ill get tomorrow. 2 Quote Link to comment Share on other sites More sharing options...
73crownwagon Posted September 15, 2013 Author Share Posted September 15, 2013 This weekends achievements. New radiator installed. 99% wired up thanks to team retep Electronic ignition in Driveshaft in but not quite finished just yet. Accelerator cable installed Trans mount painted black to hide from Mr wof man. And a touch of sound deadening 1 Quote Link to comment Share on other sites More sharing options...
73crownwagon Posted September 16, 2013 Author Share Posted September 16, 2013 This afternoons project. Took gas tank out to fix my fuel guage ontop of the tank. Also replaced all the lines with copper and re installed it all back in after a decent degrease and clean. 1 Quote Link to comment Share on other sites More sharing options...
73crownwagon Posted September 18, 2013 Author Share Posted September 18, 2013 Out with the old in with the new, New tyres alot larger then the old ones so got one put onto one of my rims to make sure there was clearance before I paint the steels 5 Quote Link to comment Share on other sites More sharing options...
73crownwagon Posted September 20, 2013 Author Share Posted September 20, 2013 Vans sitting on blocks at the mo took the tyres off and spraying my miss match steels 2k gloss black tomorrow morning. 1 Quote Link to comment Share on other sites More sharing options...
73crownwagon Posted September 21, 2013 Author Share Posted September 21, 2013 Oh yeh I also have my van tattooed on my leg haha And it's in a music video 3 Quote Link to comment Share on other sites More sharing options...
73crownwagon Posted September 21, 2013 Author Share Posted September 21, 2013 http://vimeo.com/m/70002643 Quote Link to comment Share on other sites More sharing options...
73crownwagon Posted September 21, 2013 Author Share Posted September 21, 2013 Took out my gearbox and started making my rose joint shifter, bolted a shifter to the bell housing I pulled out of a Toyota Previa at pick a part. Just have to make the rods for it now then skids on! Quote Link to comment Share on other sites More sharing options...
peteretep Posted September 22, 2013 Share Posted September 22, 2013 Denham cant use the internet like a big boy so here is some pics from his latest work      reyummms  6 Quote Link to comment Share on other sites More sharing options...
73crownwagon Posted September 23, 2013 Author Share Posted September 23, 2013 Sorry about my photos not working photobuket it shitty, hopefully they come back after time. Trying out iforce hopefully works Progress finished gearbox, put it back into van, got my wheels back from paint http://www.iforce.co.nz/View.aspx?i=j0y5anui.13k.jpg http://www.iforce.co.nz/View.aspx?i=potskvdk.12g.jpg http://www.iforce.co.nz/View.aspx?i=rh2j5l51.srp.jpg http://www.iforce.co.nz/View.aspx?i=nf52wcpx.r3z.jpg http://www.iforce.co.nz/View.aspx?i=yvsxu2a0.nbk.jpg Quote Link to comment Share on other sites More sharing options...
73crownwagon Posted September 29, 2013 Author Share Posted September 29, 2013 pictureless update, dont want to piss off photobucket just yet. had sentra dave and ned around today home boys know timing alot better then I. after a small amount of petrol leakage from my crappy attempt at copper fuel lines :s got the motor running FUCK YEH! sounds fantastic, idles nice just a small amount of fine tuning could be done. so just need to bleed the brakes and make the engine cover fit snug BOOM van be praying again soon 1 Quote Link to comment Share on other sites More sharing options...
73crownwagon Posted October 2, 2013 Author Share Posted October 2, 2013 Bled brakes last night so took it for a hoon ran pretty good just didn't like taking off in first so it's off the carb tuners this morning and a wheel alignment. Re bolted my seats 100 mm back for added room. Cut up and re welded engine cover for snug fit around motor added with foam tape. Tequila bottle wind screen wiper bottle. Hanger bearing mounted wth 3mm steel plate. Original Air filter re attached to carb with silicone joiner to keep with original Steeze 5 Quote Link to comment Share on other sites More sharing options...
73crownwagon Posted October 2, 2013 Author Share Posted October 2, 2013 Video http://m.youtube.com/watch?v=c5OlCNTgXug 2 Quote Link to comment Share on other sites More sharing options...
Popular Post 73crownwagon Posted October 6, 2013 Author Popular Post Share Posted October 6, 2013 Was dying to get out if the city so took van for official test run down to coro peninsula. Van ran fantastic! Apart from having no speedo, temp guage. No choke and no vacuum advance haha and the only thing that broke was the rubber exhauste hanger on the way home but a botch job of some wire on the out skirts of Thames it was all sorted! 10 Quote Link to comment Share on other sites More sharing options...
73crownwagon Posted October 7, 2013 Author Share Posted October 7, 2013 One thing I wasn't happy with about the van is the exhauste isn't loud enough! Peter and Stephen reckon they couldn't hardly hear it. What would make this louder? It's currently just running one hotdog and 2" pipe. I have a set of pipe extractors that I wouldn't mind using rather then the cast ones Quote Link to comment Share on other sites More sharing options...
73crownwagon Posted October 7, 2013 Author Share Posted October 7, 2013 2 Quote Link to comment Share on other sites More sharing options...
73crownwagon Posted October 20, 2013 Author Share Posted October 20, 2013 Sooooooo LAKEPIPE! 2.5inch pipe, one coby. Shit sounds sick as now. Test drove went fantastic with the fels family out to Cornwallis beach today accompanied buy daves and livs 626 coupe and neds starlet!!!!!! 9 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.