Backer101 Posted June 25, 2012 Share Posted June 25, 2012 Hey everyone. I am in need of a bit of help. Iv got a 2l pinto that im trying to get running, just on the ground. And i can not get any spark. I was using a lumenition ignition system, me and my mate did a dodgy wiring guess where things went, and buggerd that. So iv got a new electronic ignition, not lumenition, and still no spark. I had the coil and the distributor tested and are fine. What else can it be? Im sure its all wired up correct. Any help please!! Quote Link to comment Share on other sites More sharing options...
J-W-G Posted June 25, 2012 Share Posted June 25, 2012 Earths allgood? Fuel? Quote Link to comment Share on other sites More sharing options...
Backer101 Posted June 25, 2012 Author Share Posted June 25, 2012 Yea the earth is good. Guess i should try another place though. I have it bolted at the manifold. Fuel? Not yet just trying to get a spark by touching the spark plug on an earth. Quote Link to comment Share on other sites More sharing options...
Vai-Man Posted June 26, 2012 Share Posted June 26, 2012 puting the plug on the block and cranking you mean? is it in a car? if your not getting spark at any plug check the ht lead. getting power to the coil?. get a multi meter and check Quote Link to comment Share on other sites More sharing options...
sholdowa Posted July 3, 2012 Share Posted July 3, 2012 Yea the earth is good. Guess i should try another place though. I have it bolted at the manifold. Fuel? Not yet just trying to get a spark by touching the spark plug on an earth. Do you get a spark across the points if you manually open them? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.