rb drifter Posted January 2, 2012 Share Posted January 2, 2012 BINGO!!! http://www.trademe.co.nz/motors/car-par ... 499060.htm not sure if lenght is right but could always ask for different sizes if not. Quote Link to comment Share on other sites More sharing options...
J-Calico Posted September 7, 2012 Share Posted September 7, 2012 iv borrowed this photo from bigA and was wondering if it would work in the old lancer i have been thinking about doing this too but trouble is finding an adjustable shock like that? I vote no, From what Big A said that setup didnt work very well anyway, if your thinking of immitating the orientation of the shocks I mean. Quote Link to comment Share on other sites More sharing options...
J-Calico Posted September 7, 2012 Share Posted September 7, 2012 Is your dash Tidy/uncracked? They rust in that spot in the enigne bay due to the brakemaster cylinder/reservoir being there Quote Link to comment Share on other sites More sharing options...
karlb Posted September 8, 2012 Author Share Posted September 8, 2012 dash has a couple of very little cracks which have been filled with a special dash repair goo.and the rust in the engine is all gone. new plates welded in there. engine bay was taken back to bear metal epoxy primed, 2k primed then 2k white top coat Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.