Jump to content

rover v8 erratic spark


CONROD

Recommended Posts

right got me a rover 3.5 in my sprint boat and having trouble with the spark .ive had it running and it runs sweet but when i turn it off and try to start it again the spark becomes intermitant and erratic ,ive replaced the coil and resistor and tryed running the coil direct of the battery to elimante the igintion. I had a sparky mate of mine convert the distrubuter back to points because the old dissy had a broken stator and the illumination module was fucked. Shes all timed correct etc and was running great ,anyone got some ideas or had simalar issues chur

Link to comment
Share on other sites

distrubtor cap looks sweet as ,any way of checking the coil to see if shes algood other than using a test light,ive checked voltage gettin to the coil though the resistor which is 9 volts this is normal? tryed to start it again started first pop stoped her and she wont go again.checked spark comng out of the coil, fuckall !do you think it could be the condenser? its new but old coil was run without a resistor so it fucked the coil when it got hot

Link to comment
Share on other sites

thanx for the help allgud now sparky had put wrong points in the dissy and condensor was cooked replaced these parts and sweet as now ,had a mk1 esky with the 3t toyota motor but the dyno tuner fucked it long story had it under full load for nearly 5mins then when it blew he blamed me still goin to court over it,mite repower with a sr20det at some stage got 1 siting in da garge :mrgreen:

Link to comment
Share on other sites

thanx for the help allgud now sparky had put wrong points in the dissy and condensor was cooked replaced these parts and sweet as now ,had a mk1 esky with the 3t toyota motor but the dyno tuner fucked it long story had it under full load for nearly 5mins then when it blew he blamed me still goin to court over it,mite repower with a sr20det at some stage got 1 siting in da garge :mrgreen:

what are you joking full load for 5mins is insane i hope you have warned others not to go see this clown

Link to comment
Share on other sites

yip certainly have but for legal reason i cant rag him hard on the internet ,he blamed a temp worker he had workin for him at the time which i belive was the truth but the way he went about righting wrongs is what got me fucked off if he had been civil an shit about the whole thing it could be worked out.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...