Scrubb Posted December 29, 2007 Share Posted December 29, 2007 Hey guys, I just bought a new condenser for my EX as I thought thats what might be causing some issues I have. The one I took off is 0.27uF and the one I put on which I got from repco is 0.22uF and I think the car could possibly be running worse now (but could just me be ) Will this make a difference? And does anyone have a 4G32 out of an EX that they can check or know what rating condenser I should be using? Thanks in advance Quote Link to comment Share on other sites More sharing options...
Scrubb Posted January 3, 2008 Author Share Posted January 3, 2008 Bump. Def misses alot more.. Does anyone know what rating condenser EX Lancers with 4G32's have? Quote Link to comment Share on other sites More sharing options...
lowlancer Posted January 3, 2008 Share Posted January 3, 2008 Try taking the condensor off and see how it runs, then try both the old one and the new one. Why did you buy one with a different rating? Never even ran a condensor in my Celeste, was never an issue Quote Link to comment Share on other sites More sharing options...
HUNTD Posted January 3, 2008 Share Posted January 3, 2008 Whats the part number off the new one. Im not at work but iv got a book here i can check if you have been sold the correct one Quote Link to comment Share on other sites More sharing options...
HUNTD Posted January 4, 2008 Share Posted January 4, 2008 Should be a GM556 anywho Quote Link to comment Share on other sites More sharing options...
Scrubb Posted January 4, 2008 Author Share Posted January 4, 2008 Got one with different rating cuz I'm not much of a mechanic lol So I went into repco said "I need a new condenser, heres the engine and chassis #" and thats what I was given. I told them "This is a different rating to the one that came off it" and I got told "well this is the part for your car that shows up on our computers"... Tried asking for one with the same rating but "they dont have access to that information.. only what parts go to which car" In my defence, I only go there cuz its a 2 min walk down the road So the new one I got is 0.22uF and the package says: BOSCH GM553 CONDENSER GM553-C F005X047223AN The old one broke so the wire got cut off and not much wire left on it.. I could join a wire to it and put a connector on it but its easier just to get the right on if I can or run without one.. they're cheap as chips. Thanks for all your help Quote Link to comment Share on other sites More sharing options...
CaMpylobacter Posted January 4, 2008 Share Posted January 4, 2008 Should be a GM556 anywho fuckin' bang. homos pwn3d you with wrong one hard. slam the correct one on there. if it's missing. have you done leads/cap/rotor/plugs and all that kind of shit? does it miss THAT bad? Quote Link to comment Share on other sites More sharing options...
Scrubb Posted January 4, 2008 Author Share Posted January 4, 2008 Awesome is that GM556 a 0.27uF like my old one or different? Just trying to figure out oif the old one was proper one or not I replaced cap, rotor, points and adjusted points. Havnt done leads yet. It used to only miss when going constant speed in third gear and when going really slow in 1st/2nd or when I accelerated only a tiny bit in 1st and 2nd or when decelerating but if I accelerated it would stop. Quote Link to comment Share on other sites More sharing options...
HUNTD Posted January 4, 2008 Share Posted January 4, 2008 Tried asking for one with the same rating but "they dont have access to that information.. only what parts go to which car" Sorry dont know what rating it is.... heres a bosch online catalouge mite be there but i doubt it http://www.bosch.com.au/content/languag ... ogue07.pdf Quote Link to comment Share on other sites More sharing options...
Scrubb Posted January 4, 2008 Author Share Posted January 4, 2008 Cool, I'll take it out of the packet before I buy and see Thanks! Makes no difference that mines a belt driven engine? Quote Link to comment Share on other sites More sharing options...
Scrubb Posted January 4, 2008 Author Share Posted January 4, 2008 Got a local Mitsi dealer to order the GM556 and should be there monday but it looks like it has an extra wire or something coming off it which this one dosnt have? What is that extra wire bit? Quote Link to comment Share on other sites More sharing options...
CaMpylobacter Posted January 4, 2008 Share Posted January 4, 2008 probably jsut an external earth, instead of earthing out through the condensor itself Quote Link to comment Share on other sites More sharing options...
Scrubb Posted January 8, 2008 Author Share Posted January 8, 2008 Got a GM556, Car runs like it did before I replaced condenser the first time (jerking/missing wise) but it has no writing on it what so ever so dont know what the specs are.. I just put tape around that extra piece lol. Might just cut it off. Does anyone have a 4G32 out of a Lancer EX and can tell me the condenser rating? would help me alot.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.