dirty_leppa Posted August 4, 2007 Share Posted August 4, 2007 hi, im pretty certain i want to replace mt L20et with a L28 which i will turbo but i thort i mite have a go at stroking it for a bit more reliable power and torque. 1st off all what is involved with this path of work and what is needed. 2nd if all goes to plan i will be throwing some forged rods an pistons into the L28. just wandering who would know where to get some. lastly, im just wandering what head would be best to use in this application, the L20et head or the stock L28 head. any help is well apreciated thanx guys for any info Quote Link to comment Share on other sites More sharing options...
zep Posted August 4, 2007 Share Posted August 4, 2007 3.1 stroker? http://zhome.com/rnt/3.1HanveyProject.htm Google that for more info, is a very cool project (but I doubt cheap). Quote Link to comment Share on other sites More sharing options...
dirty_leppa Posted August 4, 2007 Author Share Posted August 4, 2007 thx m8. any help will do at this moment and if it works out to expensive ill just run a modified turbo L28 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.