filthy one Posted May 7, 2007 Share Posted May 7, 2007 anyone know where i could get a new front S1 rx7 driveshaft yoke{has the spline for the gearbox} mines worn & oils starting to seep out Quote Link to comment Share on other sites More sharing options...
htwn-escort-boy Posted May 7, 2007 Share Posted May 7, 2007 tried local driveshaft balancers? went to get mine balanced by some guy and he sold me a brand new yoke. Quote Link to comment Share on other sites More sharing options...
SYKOV6 Posted May 8, 2007 Share Posted May 8, 2007 you could get the old one turned down and then fit a sleeve of the correct outside diameter. are u sure the yoke is worn not just the rear gearbox seal? the yokes are made from hard as steel and shouldnt wear unless its from a million miler donor car. if u have had the shaft in and out lots of times during construction of your beast the rear seal is likely to be damaged. it is a $10 part and easy to replace Quote Link to comment Share on other sites More sharing options...
Ke36 Posted May 8, 2007 Share Posted May 8, 2007 most of the early mazda yokes are the same mate 323,626, 808, rx7 etc so just get one from a wreckers or buy sell etc shouldnt be too expensive Quote Link to comment Share on other sites More sharing options...
CaMpylobacter Posted May 8, 2007 Share Posted May 8, 2007 yup, new seal time. if it's worn a lip, then bust into SKF bearings and get a speedi sleeve for it. should be able to get a suitable seal at the same time. sorted. would be very unlucky if your current yoke was running in the same groove as it was when in an rx7, thus seal damage from installation = prolly the go Quote Link to comment Share on other sites More sharing options...
mutiny Posted May 9, 2007 Share Posted May 9, 2007 most of the early mazda yokes are the same mate323,626, 808, rx7 etc so just get one from a wreckers or buy sell etc shouldnt be too expensive he speaks the truth bro, give me a pm if u want another one Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.