DJZ Posted October 7, 2006 Share Posted October 7, 2006 Hey, I've just converted my EX from a 4G32 to a Sigma 4G63, I'm using the factory Lancer gearbox/cable with the Sigma clutch, I've fitted new spigot and release bearings, the problem is its making a whirring noise from the clutch when the pedal is depressed with the engine running. Has anybody done a 4G63 conversion using the factory Lancer gearbox before? I've tried adjusting the cable from one extreme to the other and it doesn't seem to make much difference. Quote Link to comment Share on other sites More sharing options...
lowlancer Posted October 8, 2006 Share Posted October 8, 2006 Spunds like release bearing isn't on properly or soemthing... Quote Link to comment Share on other sites More sharing options...
DJZ Posted October 8, 2006 Author Share Posted October 8, 2006 Turns out there is a different number of splines on the 1600 gearbox shaft compared to the Sigma one, I'll have to find a clutch plate with the Lancer splines but the size of the Sigma one. Quote Link to comment Share on other sites More sharing options...
ProZac Posted October 8, 2006 Share Posted October 8, 2006 Splinearrific, splinetacular, spligantic. Splines. Quote Link to comment Share on other sites More sharing options...
lowlancer Posted October 8, 2006 Share Posted October 8, 2006 Or get a sigma box. Stronger. easier task. Quote Link to comment Share on other sites More sharing options...
DJZ Posted October 8, 2006 Author Share Posted October 8, 2006 Don't want to chop up the floor and muck around with the gearstick. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.