mikep Posted April 3, 2006 Share Posted April 3, 2006 as above. starion block,vr4 pistonds and rods. evo head. plenium done. complete engine loom wired up to engine- where to go from there. what do you need to wire to what? any one done it before? will use evo ECU. any one have diregrams etc...????? any thing to shed light on the situation mike Quote Link to comment Share on other sites More sharing options...
isnowi Posted April 3, 2006 Share Posted April 3, 2006 I have pin outs for a vr4 ecu, but not an evo, if you use an evo ecu you need the evo afm etc. Quote Link to comment Share on other sites More sharing options...
mikep Posted April 4, 2006 Author Share Posted April 4, 2006 be keen for some of that-you got PM Quote Link to comment Share on other sites More sharing options...
eke_zetec_RWD Posted April 25, 2006 Share Posted April 25, 2006 wow your keen. im putting a vr4 motor into ex aswell. the factory lume is crazy, to bulky and sht. went for a link way easy to wire up. interestd to find out hw it goes tho Quote Link to comment Share on other sites More sharing options...
rwdevo Posted March 25, 2011 Share Posted March 25, 2011 hey guys ive got a link also and need to do the wiring. were do i start and what do i do? i no which plugs go to motor etc just dont no what else to do with other connections Quote Link to comment Share on other sites More sharing options...
Raven Posted January 2, 2012 Share Posted January 2, 2012 try projectzerog.com wicked site for 4g engine conversions. ive done conversion before and im only 20 will upload all pics of engine rebuild and conversion. quite a few good cheap tips on the site to. hope that helps Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.