WildPlumDx Posted June 24, 2005 Share Posted June 24, 2005 hey just wondering how do you unbolt a pulley its just doesnt lock what do you do ?! thanks Quote Link to comment Share on other sites More sharing options...
DavidTheCreator Posted June 24, 2005 Share Posted June 24, 2005 where is it ...crankshaft??? if it is then if its in the car put it in first gear , if not take the sump off and jam a piece of WOOD through the crank ... \cheers mongol Quote Link to comment Share on other sites More sharing options...
Guest blown4 Posted June 24, 2005 Share Posted June 24, 2005 take the starter off and jam the flywheel with something Quote Link to comment Share on other sites More sharing options...
WildPlumDx Posted June 24, 2005 Author Share Posted June 24, 2005 the engine is in the car and yes the crankshaft and i like the idea of the 1st gear thing! was gonna do it but wasnt sure if it was good for the car thanks! i'll do that oooh also my pulleys cracked put i measured a 4k pulley and its the same diameter this is for my 4g54 mitsy 2.6L ute engine reakon she'll be sweet with a 4k pulley !? Quote Link to comment Share on other sites More sharing options...
WildPlumDx Posted June 24, 2005 Author Share Posted June 24, 2005 nah just went outside did the gear thing she aint budging! handbrake on too it just gets all springee winds up and just wont crack maybe i need to wack a spanner with a hammer !? dunno! Quote Link to comment Share on other sites More sharing options...
drftnmaz Posted June 24, 2005 Share Posted June 24, 2005 figure out what way the pully turns and then use a power bar on the pully so the bar is close to a chassis rail in the right direction then disconnect the coil and if u really want the plugs, then line the bar up and give the ign a real quick flick over and this should crak the bolt loose. Quote Link to comment Share on other sites More sharing options...
WildPlumDx Posted June 24, 2005 Author Share Posted June 24, 2005 hey thats a good idea but problem is my heads not on soooo can ya dream anything else up!? Quote Link to comment Share on other sites More sharing options...
DavidTheCreator Posted June 25, 2005 Share Posted June 25, 2005 was gonna reccomend that but thats a bit cowboy haha Quote Link to comment Share on other sites More sharing options...
drftnmaz Posted June 25, 2005 Share Posted June 25, 2005 ur head doesn't need to be on, thats not cowboy, its jst oldschool, before we had $1500 air guns to do the job, just use big blocks of wood so u dont damage nething. Quote Link to comment Share on other sites More sharing options...
WildPlumDx Posted June 25, 2005 Author Share Posted June 25, 2005 done it! pulled the starter motor off and did it the right way stuck a tire iron in the flywheel to jamb it worked sweeet! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.