4agze KE70 Posted April 19, 2005 Share Posted April 19, 2005 Gidday everyone I have just started to build a ke70 sedan with map 4agze. Just a couple of questions before i go rushing into things im going to use a t50 gearbox i have sourced a 22 spline with a 4age bellhousing will that fit to the 4agze or do the have there own bellhousing? If they do the gear box support brackets will be different also won't they? Also for the gearbox cross member what do i use? Im guessing an ae70 cross member and mounts will need to be sourced? If you have any links or photos that might help me on my way that would be great. Thanks Shaun Quote Link to comment Share on other sites More sharing options...
Toucan Posted April 19, 2005 Share Posted April 19, 2005 T50 and 4AGE bellhousing will fit the 4AGZE no problems. I'm not sure about the rest of your questions, but you are right and will most likely need to make new g/box mounts or relocate the original one. Good luck man, keep us posted with your progress Quote Link to comment Share on other sites More sharing options...
4agze KE70 Posted April 19, 2005 Author Share Posted April 19, 2005 Sweet so i can go ahead with getting T50 and support brackets but one more question before i do theres another t50 for sale but it has the clutch slave cylinder on the exhaust side. Does this mean that its not an orginal 4age t50 what complactions does this create. Quote Link to comment Share on other sites More sharing options...
RT Posted April 19, 2005 Share Posted April 19, 2005 my mate did this conversion with the 4agze.. http://www.retrotech.co.nz/sr.html i dunno, you could look at the pics..? Quote Link to comment Share on other sites More sharing options...
Toucan Posted April 19, 2005 Share Posted April 19, 2005 Im not 100% sure, but if you have a read of this page, it might answer some of your questions... http://www.users.bigpond.com/vidore/toy ... engine.htm Quote Link to comment Share on other sites More sharing options...
CaMpylobacter Posted April 19, 2005 Share Posted April 19, 2005 get a rwd waterpump, and if it's a bigport 4agze get hold of a rwd bluetop inlet manifold, otherwise you will have to cut the throttle off one end, weld it on the other.. use rwd flywheel and clutch etc, 4agze items wont fit the bellhousing ae86/ae70 engine mounts, ae70 crossmember T50 will die after a little while, w55 conversion would be the go Quote Link to comment Share on other sites More sharing options...
WDE_BDY Posted April 19, 2005 Share Posted April 19, 2005 DELETED Quote Link to comment Share on other sites More sharing options...
4agze KE70 Posted April 19, 2005 Author Share Posted April 19, 2005 Ok so if i go w5* gearbox i can get one with 4age bellhousing from reardrive what fabrication will need to be done to ke70 sedan to fit? Any tunnel bashing, are they cable or hydrualic clutch? Will the gear shifter sit further back? Also what tail shaft would i use i would have to get one made to suit correct? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.