HighLUX

Interesting idea will look into doing this

townace van

Anybody done this before? Toying with the idea of doing it to the townace since the rear already has adjustables

From my experiences with matamata, if you enjoy drinking waikato,burnouts and dairy farmers daughters then matamata is for you

Exactly what I needed to hear thanks

Have been playing round with fitting hiace brakes and hubs to the townace, only problem is the inner bearing on the hiace hub is larger than the townace bearing, can the seal and bearing be pressed out and a new bearing of suitable size be pressed in with no problem so the hubs will fit on the townace spindle?

Green brothers in tauranga if you have no luck in hamilton, they do alot of hilux diff conversions

yea mounting all the gen2 stuff and wiring are my main concerns, hoping flanges on intake and exhaust could just be changed and port matched.

Whats the differences on gen3 engines vs gen2? I know theres some improvements in the gen3 engine over the gen2 (better oil pick up setup better head more hp etc) Was thinking of getting a gen3 3sge since there cheap and giving it a freshen up to eventually replace the gen2 engine in the van. Will the gen2 mounts powersteering alternator waterlines etc bolt up to a gen3 engine? Are the looms different? Cheers

Hmmm E series diffs aint to happy with receiving clutch kicks Yum yum! spider gear soup anyone? Will get the f series in as soon as funds permit Chucked some new shocks in the front aswell Whats the deal with double swaybar setups?

Turns out theres no injector pulse coming from the ECU and its only firing because its getting fuel from the cold start injector, also theres a nice melted blob of solder on one of the curcuit boards bridging a couple of diodes, im guessing its time for a new ECU?

Yea should be fine, all RB manual boxes share the same yolk except rb25det gearboxes

Has all three of those, is @ the auto sparkys now getting looked at, theres no power going to the ignition feed for some reason and it still wont start when manually bridged to power it, does the ignition feed run to anywhere on the motor aswell as the ECU that would cause it not to run?

how common is it for 3sge igniters to die? could this be causing the problem? cheers

Was running fine till halfway to work this morning it just died, will fire once when trying to start then cough and die, wont fire again unless the ignition is turned off then on again. Can hear the fuel pump still buzzing away and fuel filter is new. Guessing its an electrical problem but dont know where to start looking for problems cheers

Yep had been doing fairly spirited driving all weekend

Yea ohwell things happen. Yep will get them beefed up when I get it fixed

Was driving home from tairua in the weekend and heard a pop, pulled over expecting to find a flat tyre but found this Bottom shock mount has cracked and broken off which sent the tein into the road bending it slightly(should straighten out) then into the rim taking out a nice chunk of it. So out came the rangimods to get home Still bowling round with it like this till I get the mount re welded tomorow

Is there a possibility that an oil cooler for a beams 3sge fit a gen2 3sge? Cheap Trust one on trademe for an altezza with built in thermostat that im looking at

nah haven't brought one yet was just wanting to get some opinions on them first, dont want to buy something then have it leak oil and cook my engine

do 33s have the bleed bolt on the plenum that you take out while filling the radiator? RB engines can be cunts to get all the air out of the coolant system so you may have an air lock

http://www.trademe.co.nz/Trade-Me-Motors/Car-parts-accessories/Performance/Radiators-cooling-systems/auction-252067719.htm Something like this then add an oil cooler to it, and as 3sge engines have a problem with low oil pressure on startup due to the angle the filter sits on im hopping it will help fix this problem

Was looking at getting one of these kits off trademe, anybody using one? are they crap or not to bad quality? Want to put one on the 3sge in the townace since the oil filter is in a cunt of a place to get at. Would a kit with a built in thermostat be recommended?

iv fit a steering wheel from a townace to a hilux with no problems so could be possible that itl swap straight over

nah only for a dirty old hilux so will be sweet