Mechanic for cash job CHCH

[rforge]

Looking for someone after cash job reassembling my ca18det and getting it running.

On first start up number 1 cylinder wasn't firing at all, suspected bent valve but may just have been dirty injector, will get these checked, head is off.

Car is home (North Canterbury) but i now live in Dunedin for uni, have 3 weeks holiday mid June and want it going by end of holidays. Can drop off anywhere in Chch area or come to me, whatevers easiest.

Please let me know if you can help as i need this sorted and i won't have time to do it

Cheers,

Rikki

0274869603

[rforge]

viewtopic.php?f=17&t=25038&p=731605&hilit=ca18det#p731605

[rforge]

Engine is wired up and had it running a couple times (albeit on 3 cylinders, idling onnly untill it stalled, <1min).

Has chipped ecu for the usual mods, is in a ke30, pretty much everthing done ie brakes clutch etc and just want to drive it ha.

So as far as i can see it really only needs head and manifolds put back on, and probably decent fuel lines run as just has rough hose job at the moment. This is providing injector number one is the problem otherwise job will include trouble shooting problem to get it running sweet.

[RUNAMUCK]

Could be a dead Coil pack?

[rforge]

Has brand new wastespark setup and plugs professionaly wired up, but will try anything, how would i check, take to auto sparkie? Was thinking may as well get leads checked too, heard could be too much resistance if they're not so good quality